merlinpjl

Active Member

• Dec 21, 2022

• #1

Bought a 2006 TD4 Freelander 1 from an auction. Obviously a big risk, but happy to go with it.
The car apparently cut out on the motorway.
Started with a new battery as the existing one was shot.
When I spin the engine over, it tries to fire, but there is engine oil coming out of the top of the engine near to injector 1. It’s under pressure as it sprayed most things near it.
Any suggestions before I start stripping the top of the engine?

 

Alteredtech

Well-Known Member

• Dec 21, 2022

• #2

Hi,

Do you have a picture of the engine top ?

If it is oil, one screw is probably missing, but not related to a starting issue ...

Regards.

 

Nodge68

Well-Known Member

• Dec 21, 2022

• #3

merlinpjl said:

Bought a 2006 TD4 Freelander 1 from an auction.

Click to expand...

Oo, expensive RFL.

 

merlinpjl

Active Member

• Dec 21, 2022

• #4

Alteredtech said:

Hi,

Do you have a picture of the engine top ?

If it is oil, one screw is probably missing, but not related to a starting issue ...

Regards.

Click to expand...

It was a screw that I had taken out to remove the plastic injector cover. Schoolboy error, that could have caused me wasted hours!

 

M

marley

New Member

• Jul 21, 2023

• #5

Nodge68 said:

Oo, expensive RFL.

Click to expand...

had this problem when I bought mine ,mine was the plastic rocker cover on the top of the engine had been cracked by someone that had over tightened the cover that goes on top of the rocker cover .

 

M

mbrokof

Active Member

• Jul 22, 2023

• #6

merlinpjl said:

It was a screw that I had taken out to remove the plastic injector cover. Schoolboy error, that could have caused me wasted hours!

Click to expand...

Not really schoolboy, the garage where I had the car once took it off and created as well

 

Dar ran Dar ran

Well-Known Member

• Jul 22, 2023

• #7

have you got it running?