Dad had a Traveller and he convinced us that the back luggage space area was a proper seat and the blanket on the floor was luxury, still the family of six went all over the country on the annual holliday, I remember Mum slapping him when he got on the M1 and hit 60 miles an hour! I learnt to gas weld at 16 laying under it every MOT time joining patch to patch. Happy Days.
 
Dad had a Traveller and he convinced us that the back luggage space area was a proper seat and the blanket on the floor was luxury, still the family of six went all over the country on the annual holliday, I remember Mum slapping him when he got on the M1 and hit 60 miles an hour! I learnt to gas weld at 16 laying under it every MOT time joining patch to patch. Happy Days.

My dad wrote a guide on rewooding a Traveller.
 
When i worked at the dealers head off, decoke, valve service and refit was considered a steady Saturday mornings work. Try that on one of todays one litre cars.
 
Cedar would be to soft and damage easily. Oak or sweet Chestnut would be better. But sapele or idigbo would also work.but they used ash so ash is the thing they use. There's a treated pine called accoya that could be used. But it doesn't look great( sort of grey)
 
Cedar would be to soft and damage easily. Oak or sweet Chestnut would be better. But sapele or idigbo would also work.but they used ash so ash is the thing they use. There's a treated pine called accoya that could be used. But it doesn't look great( sort of grey)
I think there must be something special about ash, don't they make Morgan chassis from it?
 
I think there must be something special about ash, don't they make Morgan chassis from it?

Yes, there is something special about ash: it is light and strong with a lot of flex before it breaks and very uniform with little knotting. So, yes, there were good reasons to use ash. Kept in good nick (varnished as required) it last 40 years or so a go so not too bad.
 

Similar threads