wattfield

AKA Dirk Diggler

• Feb 14, 2021

• #1

I’ve just reprogrammed a spare key with an Autel AP200 reader, but it’s very difficult to remove from the port. Am I right in thinking it should just pull out or is there a tab to press or something else I’m missing?
It worked fine for the key, by the way!

 

Nodge68

Well-Known Member

• Feb 14, 2021

• #2

The plug should just pull out the port.

 

wattfield

AKA Dirk Diggler

• Feb 14, 2021

• #3

Nodge68 said:

The plug should just pull out the port.

Click to expand...

I’ve been searching online and it seems to be a common problem. I just don’t want to damage the port.

 

wattfield

AKA Dirk Diggler

• Feb 14, 2021

• #4

Strange, tried again and it came out no bother!

 

GrumpyGel

Well-Known Member

• Feb 14, 2021

• #5

wattfield said:

Strange, tried again and it came out no bother!

Click to expand...

lol, that is so annoying when that happens. Specially when you don't know you did different.

Had exactly the same type of thing clipping the master clutch cylinder on my motor recently. Tried loads of times with it not working, then all of a sudden its locked into place and good as gold

 

kernowsvenski

Well-Known Member

• Feb 14, 2021

• #6

GrumpyGel said:

lol, that is so annoying when that happens. Specially when you don't know you did different.

Had exactly the same type of thing clipping the master clutch cylinder on my motor recently. Tried loads of times with it not working, then all of a sudden its locked into place and good as gold

Click to expand...

I had the same with the brake light switch when I had the three amigos a few years ago. Struggled like hell with it for 25 mins. Gave up and left it overnight. When I returned the next morning it came out instantly.