KingMustafa
Member
Dears Good day,
Please i need pin out detail for the obd2 for P38
Thank you for you kind support
Please i need pin out detail for the obd2 for P38
Thank you for you kind support
KingMustafa
Member
I tried to find out pic but could not. I need that becz i can not read the ECU by the scan tool. i reach all other ECUs & becm. but the Engine ecu can not> plz help?
KingMustafa
Member
Dear, Highly appreciated your support, Could you tell me which wire from OBD goes to the Engine ecu or use to diagnostic the ecu for engine?
brianp38dse
Well-Known Member
Have you checked and cleaned the pins in connector with electrical contact cleaner, and what diag are you using.
brianp38dse
Well-Known Member
KingMustafa
Member
I am using Lynx tool. I work wth this tool with no issues but in this car is really strange ( gems petrol)
myfirstl322
Well-Known Member
It's not an L322Well at least that one good point on an L322
brianp38dse
Well-Known Member
It's not an L322
Just worked that one out, its all these post about the L322 atm that's getting me confused, mind that is very easily done I blame it on RR ownership it will drive us all to the nut house
Wazzajnr
Well-Known Member
Sorry, my mistake, I thought it would be compliant by then but the requirement only came in from 2000.
Tgat said, I'm fairly sure it will use the same wiring. There are a number of people on rr.net that have had some limited success with elm327 scanners which suggests that the wiring is standard obd2 wiring
Tgat said, I'm fairly sure it will use the same wiring. There are a number of people on rr.net that have had some limited success with elm327 scanners which suggests that the wiring is standard obd2 wiring
myfirstl322
Well-Known Member
Good spot, missed that tiny parenthesis' remark in one of the posts!!Look like it's a gems petrol Saint.
This is why we ask for vehicle details to be in the first post - helps others to provide the most relevant information....
