H

HannahLandRover

New Member

• Apr 26, 2011

• #1

Does anybody know where you can get a total nut and bolt rebuild kit?

 

jamesmartin

Well-Known Member

• Apr 26, 2011

• #2

they dont come in kit form ,depends on what and how far rebuild will be

 

H

HannahLandRover

New Member

• Apr 26, 2011

• #3

Rebuild is a complete rebuild.

 

petit_pablo

New Member

• Apr 26, 2011

• #4

Whats remaining of vehicle to be rebuilt? Chassis, bodypanels, axles, engine?

 

Andy Land

Well-Known Member

• Apr 26, 2011

• #5

Are you stripping it all down to put it back together with new nuts and bolts then or is it already like a box of Lego?

 

L

lynall

Well-Known Member

Full Member

• Apr 27, 2011

• #6

Try a google as there is a company that does full nut and bolt kits for series land rovers but the cost is well into the hundreds
Land Rover Parts | SERIES II,IIA, III, RANGE ROVER, 90, 110, Full Body Fastener Kits

Lynall

 

Ghost

New Member

• Apr 27, 2011

• #7

Just get the lot from Screwfix or similar would be my suggestion. What I've done with mine, just buy a few hundred of the more common M6, M8 and M10 sizes with associated washers and nuts and then any other specialist bolts can be purchased as and when you find you need them.

 

Andy Land

Well-Known Member

• Apr 27, 2011

• #8

Ghost said:

Just get the lot from Screwfix or similar would be my suggestion. What I've done with mine, just buy a few hundred of the more common M6, M8 and M10 sizes with associated washers and nuts and then any other specialist bolts can be purchased as and when you find you need them.

Click to expand...

Too sensible that

 

S

slomofo

Well-Known Member

• Apr 27, 2011

• #9

Try this chap - most of my 90 is held together by fasteners they have supplied

VolksBolts Home

 

wiltshire landyman

I’m back

• Apr 27, 2011

• #10

why not just ring landrover and tell them you want a replacement for every nut and bolt ,washer, and screw im sure they will sell you the lot

 

Oddie

AntiSeptic Sandal Wearer

• Apr 27, 2011

• #11

They do a complete replacement kit. It replaces everything very effectively. It is here.

Alternatively you have to do some work and buy what you need!

 

khaos

New Member

• Apr 27, 2011

• #12

It will cost a fortune, you are better off using your own bolts purchased as needed. Every bolt I replace is over specced compared to the originals. Mine are also all rust proof. Why would you want original when you can have better?

 

jamesmartin

Well-Known Member

• Apr 27, 2011

• #13

how do you over spec a bolt

 

Oddie

AntiSeptic Sandal Wearer

• Apr 28, 2011

• #14

jamesmartin said:

how do you over spec a bolt

Click to expand...

and short of making them out of titanium, how do you rust proof one (which is over specced as opposed to stainless)?