KyleAsh91
Member
Hi All,
Having a little trouble with my disco.
Started Saturday evening were it wouldn't rev above 3000 ish RPM
Cleaned plug on ECU which was full of oil to no avail. Optimistically changed injector wiring harness this evening again to no avail.
Wastegate seems free to move,
Bypassed the waste gate modulator so to speak by fitting a boost controller (not sure if this would actually work or not) again same result.
Disconnected all the sensors on the air intake side and still seemed the same, just ran rough and misfired as you'd probably expect.
Are there any other suggestions?
Could it be a code that needs clearing to get it out of limp mode?
It's a TD5, egr blanked, otherwise standard, all filters and oil around 7000 miles old
Thanks in advance
Will keep you informed of any updates
Having a little trouble with my disco.
Started Saturday evening were it wouldn't rev above 3000 ish RPM
Cleaned plug on ECU which was full of oil to no avail. Optimistically changed injector wiring harness this evening again to no avail.
Wastegate seems free to move,
Bypassed the waste gate modulator so to speak by fitting a boost controller (not sure if this would actually work or not) again same result.
Disconnected all the sensors on the air intake side and still seemed the same, just ran rough and misfired as you'd probably expect.
Are there any other suggestions?
Could it be a code that needs clearing to get it out of limp mode?
It's a TD5, egr blanked, otherwise standard, all filters and oil around 7000 miles old
Thanks in advance
Will keep you informed of any updates