W

Wizzywill

New Member

• Jul 19, 2013

• #1

On my disco1 300tdi Auto the brake lights are not working but the Bulbs are fine
Is there a switch on the Pedal ??
And the indicators do not work when selected on the stick but work when you press the hazards light button ? Is this the relay not working if it is whereabouts is the indicator relay situated on the discovery its doing my head in can Find it !! And to top it all off now Bonnet will not pop open grrrrrrrrrrr
Don't you just love landrovers !!!!

 

Cooper267

Active Member

• Jul 20, 2013

• #2

Can't help on the other things but my bonnet hasn't opened since the last plains trip haha

Although I do think there is a switch behind the brake pedal think its white possibly maybe...

 

Cooper267

Active Member

• Jul 20, 2013

• #3

Can't help on the other things but my bonnet hasn't opened since the last plains trip haha

Although I do think there is a switch behind the brake pedal think its white possibly maybe...

 

Dippypud

Never Knowingly Understood

Full Member

• Jul 20, 2013

• #4

Wizzywill said:

On my disco1 300tdi Auto the brake lights are not working but the Bulbs are fine
Is there a switch on the Pedal ??
And the indicators do not work when selected on the stick but work when you press the hazards light button ? Is this the relay not working if it is whereabouts is the indicator relay situated on the discovery its doing my head in can Find it !! And to top it all off now Bonnet will not pop open grrrrrrrrrrr
Don't you just love landrovers !!!!

Click to expand...

Sounds like lack of maintenance ...

grease the bonnet cable when you wrestled it open ...

Relay should be on the front of the fuse board below the steering wheel...

If you have had the vehicle off-road you should check the connections at the bulb holders and the switch ...

If when off-roading you've 'whacked' a bump hard you may have jarred the inertia switches...

Brake light switch is different for ABS and non-ABS

 

W

Wizzywill

New Member

• Jul 20, 2013

• #5

Where are the inertia switches it has taken a good few hits lately haha and it has not got abs ??

 

haigy

Well-Known Member

• Jul 20, 2013

• #6

The inertia switch makes hazards come on when a sudden ikpact.shouldnt affect indicators dont think.check fuses and relays.or it could be a dodgy indicator stalk

 

discool

Well-Known Member

• Jul 20, 2013

• #7

Wizzywill said:

Where are the inertia switches it has taken a good few hits lately haha and it has not got abs ??

Click to expand...

There's only one inertia switch on a diesel-engine D1, it's part of the alarm/central locking, on operation the hazards flash and doors will unlock, if locked.