Teflon
New Member
Why do you have two perm mounted rigs?Normal for me is 2x CB permenantly mounted
Is one CB and the Other Ameteur? or are both CB?
Agree with the 'loose' PMR's
Mine are half reasonable sets; have thier own lith-ion batteries, so they do transmit pretty close to limit most the time, semi-rugedised, rubber cases, and belt clips.....
Unfortunately the clips not 'quite' big enough to clip round the sun visor; well, you COULD open it up that far, at a pinch, but you cant get the thing on or off again to use it!
Clipping it to the door pocket, normally results in it bouncing off and under the pedals
Clipping it to the seat-belt, is quite good, sort of on the shoulder, near your ear; you can hear it nice and easily, but then you cant press the PTT button very well, and talking away from the mic, VOX just thinks your back-ground noise! Mind, clipped the first half of anything you have to say, anyway!
For some reason, they nearly always end up bouncing around the passenger foot-well, then falling out whenever one of the kids opens the door......
Got to give them credit though, all that kind of abuse they've taken over the years, they still work! Though I've had to strip them and remake the areal or speaker connections a couple of times......
(And resist the temptation to try replacing the areal coil with a UNC socket, and the power transistors to up the transmitter wattage!)
Really ough to make up some kind of bracket on the other side of the CB from a bit of ali green-house bracing I can clip one to like the CB mic......