Morning all, I've been asked by a mate who lives in Barbados, to try and get him a Nissan cylinder head bolt removal bit, believed to be called a T8.....now I know there is a wealth of knowledge on here, so before I start searching, I thought I'd see if any of you had any ideas, my local mechanic just shook his head!! Thanks .
Marmaduke
Well-Known Member
T8 is a small torx bit, I could really only see it being used for holding the rocker cover down
SB9503 | Chrome Vanadium Steel Torx Driver Bit, T8 x 25 mm | RS
SB9503 | Chrome Vanadium Steel Torx Driver Bit, T8 x 25 mm | RS
Is there any thing here that will do it?
40 piece Hex Star Torx Spline Socket Bit Set Tool Kit Garage Tools Equipment | eBay
40 piece Hex Star Torx Spline Socket Bit Set Tool Kit Garage Tools Equipment | eBay
That's what I thought Marmaduke, I'm pretty sure I was told it has ten splines.....I'm still waiting for more info, but thanks for your input, Ian, the set would cover all the bases for sure !
Again I'm pretty sure he said cylinder head, but the T8 doesn't look right, I took over a T80 last month, and he said it was too big!!
Again I'm pretty sure he said cylinder head, but the T8 doesn't look right, I took over a T80 last month, and he said it was too big!!
vilguy
Do'er of stuff and the like
t8 is tiny and will not be for holding a cylinder head
t80 looks like this
http://www.ebay.co.uk/itm/T80-Torx-...S80-Impact-Professional-Quality-/160656950921
which is more like it
t80 looks like this
http://www.ebay.co.uk/itm/T80-Torx-...S80-Impact-Professional-Quality-/160656950921
which is more like it
vilguy
Do'er of stuff and the like
soz i didnt read that last bit
tell him he is being a spaz and to measure it properly
Torx - Wikipedia, the free encyclopedia
There is a guide on there of how to measure it and identify the correct size
