Thats a good point. I did track rod end the other day hahahaha. Its not wheel bearings I dont think. My wheels have never been balanced but its never vibrated like this before... it feels like its coming from the back but what do I know?
 
Simmi said:
Thats a good point. I did track rod end the other day hahahaha. Its not wheel bearings I dont think. My wheels have never been balanced but its never vibrated like this before... it feels like its coming from the back but what do I know?
Click to expand...

Might be worth checking the A-frame bushes at the chassis and the joint at the axle end. When they're worn they can cause a wobble/vibration and sometimes also cause a clunk on set-off and when slowing down or letting off power. A small amount of movement can make a huge difference to the feel of the vehicle.
 
Simmi said:
Ok ill give them a check..
Is it a metallic type clunk? I had it do that once but not done it again
Click to expand...

Yep.

I found that a sharp clunk or thud was usually the chassis bushes, but the axle wobbling or causing vibration was mostly the joint, but it could be anything like that, even the trailing arm bushes.

Indeed, even though it 'feels' to you that it might be from the rear it could be almost any worn or split bushes, radius arms, damper mounts etc.
 
Going to see if it is panhard rod thats causing the problem seen as there appears to be no bushes haha
 
i'm selling them off now £30 each need some room to make some thing else lol going fast...:D
 

Attachments

  • a log burner.jpg
    a log burner.jpg
    63.7 KB · Views: 141
defender11069 said:
hope your not taking the micky out of my metel working skill's...:mad:
Click to expand...

not at all :eek:

considered meself making a horizontal burner, just never got on with it.

with so many different "designs", was a serious question as to which performed the best :D

when's mk2 coming out? burners with afterburners?
:D:D

or forced air burners :eek::D:D
 
:D
nrgserv said:
not at all :eek:

considered meself making a horizontal burner, just never got on with it.

with so many different "designs", was a serious question as to which performed the best :D

when's mk2 coming out? burners with afterburners?
:D:D

or forced air burners :eek::D:D
Click to expand...

:D:D was thinking about doing one with a small 12volt fan attached ,,want to make one glow red..;)
 
nrgserv said:
not at all :eek:

considered meself making a horizontal burner, just never got on with it.

with so many different "designs", was a serious question as to which performed the best :D

when's mk2 coming out? burners with afterburners?
:D:D

or forced air burners :eek::D:D
Click to expand...

stand up ones seem to give out more heat but the other ones burn for longer think there be better with coal :cool:
 
defender11069 said:
:D

:D:D was thinking about doing one with a small 12volt fan attached ,,want to make one glow red..;)
Click to expand...

Small fan .. feckin' SMALL !!!

Have dreams man, have dreams and aspirations and go 'kin mahoosive with the fan ... PROPER forced air induction ... and an afterburner up the chimney ...

Then Video it so we can see it melt .. ;)
 
Got my fuel pump and just finished of making the connectors just need some rubber fuel pipe and some decent jubilee clips and i should hopefully have a running td5
 
You must log in or register to reply here.

Similar threads

M
Debyshire- fancy a few lanes Saturday?
Replies
10
Views
2K
benjimano
B
Tim in Yorkshire
Hello from the Northern Edge of North Yorkshire
Replies
7
Views
881
Tim in Yorkshire
Tim in Yorkshire
defender11069
north yorkshire lanes pic's and vid's
2 3
Replies
40
Views
5K
defender11069
defender11069
H
discovered on google maps
Replies
2
Views
989
huddy229
H
raywin
Hello from North Yorkshire
Replies
2
Views
615
Lisbeth
Lisbeth