it isnt rated at 30 bar - at least none of mine are - Chubb ones are rated at 28bar test and 15bar working pressure.

Still looks good tho - be interested in which fittings you used - Is it for lockers?

its stampd up round the rim at 30 bar budy,,whatever it is it should be more than capable,,,ile pm you something later
 
Last edited:
just fitted my diff guards too... think we all learned from callum misfortune.... cheers callum...


lookin good nunny, is it all workin now?
 
"(nick what lift kit you getting them spacers or a proper lift kit cos i know a lad who breaks discos and got loads of off road bits just let me know and il send you his number. and as for weekend mate there is more lanes in broxa forest and still a few in wykeham we didnt do i wont take us down the lane of doom tho cant be arsed getting stuck all day again,)"

craig got some lift blocks he gonna let me have cheap... gonna give them a go first... tryin to convince r lass is the hard bit.. might be worth havin a word wiv your m8 in the future...
 
just fitted my diff guards too... think we all learned from callum misfortune.... cheers callum...


lookin good nunny, is it all workin now?

not quite just waiting for few bits in post,just run air hose to back of landy,with quick connect airline fitting on for tyres,got to get 11.5mm drill bit off my old man so i can drill and then tap a 1/4 thread into bottom of tank for drain off.then ive to connect with a short bit of pipe from arb compressor to the fittings that are on inlet side of tank..
 
ya need to sort that tow point out nick,bit of a bugger when everythings caked in mud to get it on ...
033.jpg
 
will fit the bugger before i get stuck! :doh:

and attach strop and wrap it round roof bars up out of mud... :D

well thats the plan anyway...

glad ya didnt get a pic of my fat ass puttin towball on!!!!!:mooning:

i would not ave been a happy bunny!!!:mad2:
 
will fit the bugger before i get stuck! :doh:

and attach strop and wrap it round roof bars up out of mud... :D

well thats the plan anyway...

glad ya didnt get a pic of my fat ass puttin towball on!!!!!:mooning:

i would not ave been a happy bunny!!!:mad2:

ya wasnt still for long nuff,ya kept trying to loose ya trainers in mud pal
 
r lass found where i'd hid em and very kindly gave em a good clean...

took her an hour to get all the mud off em...

bless her....
 
Last edited:
its done now nick,all connected.budy...:):)
001.jpg

002.jpg

003.jpg

005.jpg


the clear cable you see runs round to back of landy quick connect fitting for inflating tyres,,had a mare the 1/8 connection on extinguisher was nakd,so had to modify it and solder fitting in instead of threading.
 
what the hell was ya paintin wiv if ya didnt even dare hold the paintbrush?:eek:

pair of pipe grips to hold it instead?:eek:

top job nunny...:)

does it work? :rolleyes:
 

Similar threads