ya gont need shackles to link stops..

theres a vid on you tube showing ya how to link em, but cant find it at the mo..

i'll show ya next time were out..
 
Yep already know nick,you can loop it through.i loopd one on sat.but put a piece of branch in so it didnt pull it that tight I couldnt undo it afterwards budy
 
there is a group doin peak district end of may on another thread..

just a thought, we could tag on with them? meet some more lz folks.. if they dont mind that is..

craig, did you mention ya had some 1" lift spacers to go under standard spring just to give a little height?
Ey up Nick... Got 2" spacers mate they just bolt under standard springs front and rear:)
 
Well I paid £50 for front n rear but
Depreciation n all... U can have em for 40 never used and heavy duty items mate
 
cool mate...
cheers...
will sort out pickin em up at some point...

ive taken my steps off.. there were totally fukd!! was rust more than hittin stuff that knacked em.. the box section under the step had disolved..

and my rear body mounts have collapsed.. gonna have to fix them shortly.. it wasnt the bumper that had lifted...
 
cool mate...
cheers...
will sort out pickin em up at some point...

ive taken my steps off.. there were totally fukd!! was rust more than hittin stuff that knacked em.. the box section under the step had disolved..

and my rear body mounts have collapsed.. gonna have to fix them shortly.. it wasnt the bumper that had lifted...
Usual script matey.. as soon as u remove the steps and the plastic covers the little rust monkeys show up:rolleyes:

More fun with mig then?? Just welded a couple of small holes on my silver one probably a few more but i choose not to look lol..

Yeah just give us a shout when u wanna swing by i'm near tesco's at seacroft, or i pick my girls up on a friday whatever is easiest for ya
 
well i work at garforth so not far from you... can pop over one eve after work..

i got ya number i'll give ya a call when i can get over..:)

did the silles for last mot.. so not scared about removin the plastic sill covers..

the rear mounts have gone up into the cross member.. the mounts r ok.. not sure what to do..:confused:

froggets do some easy on repair panels but the mounts seem ok...:confused:

squirted the bumper mountin bolts wiv wd40 cos the bumper gonna have to come off.. :(
 
well i work at garforth so not far from you... can pop over one eve after work..

i got ya number i'll give ya a call when i can get over..:)

did the silles for last mot.. so not scared about removin the plastic sill covers..

the rear mounts have gone up into the cross member.. the mounts r ok.. not sure what to do..:confused:

froggets do some easy on repair panels but the mounts seem ok...:confused:

squirted the bumper mountin bolts wiv wd40 cos the bumper gonna have to come off.. :(
Sounds like a tricky one mate would assume that you would have to lift the body som amount to get in to repair it properly unless u cut a section above out to gain access, will have a look with you when you pop round matey.
 
well nick i orderd those lights ,and they dont work either,yet i have power from the switch to the wires on lights,did continuity test with multi meter ,and volt test,cant get my head round it,what are chances of my old lights bin nakd ,and the bulbs in new lights bin nakd.pretty slim i say..
 
Last edited:
yeah will have to lift body as its dropped an inch or so...

nunny, run lights direct from battery to make sure they work b4 owt else..

if not i'd check relay.. dont they click when current goes through em...

i used to do loads of this stuff years ago... my mate raced sidecars and i used to mechanic for him.. started off with a front exit classic imp engined outfit.. ended up wiv a gsxr1100 lwb.. but packed it in nearly 20 yrs ago... ya couldnt buy stuff off the shelf.. we had to design stuff as we went along..
 
Nunny check your earth for lights... If it's earthed through a loop connector take it off and clean it up or try it somewhere else.
 
cool... good luck with swop...

if i get a minute might give ya a call and come for a nosey if that ok wiv you.. ya sed thurs eve and sat for swoppin em...
 
good luck with the swap callum,,cheers everyone for lighting advice i will have another pop at it tomoz after work...ere nick whats going on everyones working on their motors at minute,was sat really that hard on them,,l.o.l..good luck with ya repairs nick,
 

Similar threads