discomark10
Well-Known Member
could be the rotor or cap is arcing, try a spark plug out to test for spark
Station House
Well-Known Member
I'd replace rotar, dist cap, leads and probably new plugs just to eliminate
discomark10
Well-Known Member
If no spart from and.. its most likely either the coil or the ht from the coil
zeaphod
Well-Known Member
As before most likely coil.
Might be just arcing across the outside if it really only happens in the wet.
You could test it by drying the coil alone off with a heat gun (carefully)and see it that sorts it.
Once it's sorted, buy a can of conformable silicone spray and cover everything electrical. You should then be able to hose the engine without a misfire.
Might be just arcing across the outside if it really only happens in the wet.
You could test it by drying the coil alone off with a heat gun (carefully)and see it that sorts it.
Once it's sorted, buy a can of conformable silicone spray and cover everything electrical. You should then be able to hose the engine without a misfire.
discomark10
Well-Known Member
If yer get it wet it won't start...
Just think what would happen if a gaylander went near water!
