Carlos Fandango
New Member
For the last two weeks my 99 Discovery has had a starting fault that I put down to seals and washers. After replacing these it now starts first time but wont go over 50mph and is totally gutless. I've checked the usual things like oil in loom, ecu plug and carried out several purges inc the injector purge that someone mentioned in another thread.
So today I stripped it all back down again checking that I had done everything to the book and replaced the seals again(OEM). Checked that I had put the injectors in the correct sequence and its all ok. Checked round making sure I hadn't knocked anything off while doing the job
It starts first turn of the key with no smoke but wont go over 50 and struggles to get there.
Im starting to wish I had kept my 300 defender
So today I stripped it all back down again checking that I had done everything to the book and replaced the seals again(OEM). Checked that I had put the injectors in the correct sequence and its all ok. Checked round making sure I hadn't knocked anything off while doing the job
It starts first turn of the key with no smoke but wont go over 50 and struggles to get there.
Im starting to wish I had kept my 300 defender