its stuck
New Member
After owning various Japanese Shoguns /Pajero`s, I have taken the plunge and gone back to a Solihull product and am getting used to all the knocks and bangs again. I have just bought a 93 Discovery TDi. All seems to be going well, it drives similarly to my old manual 74 Range Rover (!) , but ( so far ) I have one minor problem. It wont go in and stay in low range.
When I first drove it a day or so ago, I tried out low range ( I went through all the correct procedures, both moving and static) and I got it to drive. Now however, it doesnt seem to want to engage low range. I can get it to work now and again, but it drops out. I am assuming the linkages are out of adjustment because it all seems fine when engaged although there doesnt seem to be a positive feel when it goes in.
So, my question is, if it is the linkage, how do I adjust it, where is it, and how do I actually get to it?
allan
When I first drove it a day or so ago, I tried out low range ( I went through all the correct procedures, both moving and static) and I got it to drive. Now however, it doesnt seem to want to engage low range. I can get it to work now and again, but it drops out. I am assuming the linkages are out of adjustment because it all seems fine when engaged although there doesnt seem to be a positive feel when it goes in.
So, my question is, if it is the linkage, how do I adjust it, where is it, and how do I actually get to it?
allan