Cliomad

New Member
Bought new bulbs and still no illumination, checked to see if there is any power going to them and found no live any ideas and were does the live lead to from the bulbs thanks
 
May sound silly but are they switched on? Furthest left switch by your right knee should be for the clock lights, off or the interior light.
 
I've got that switch missing I've got heated rear screen and hazard switch I've had a quick look but can't see no plug for the switch ill have another look
 
they dont all have that switch, my CSW doesnt, by right knee is hazards, rear screen and rear fog.

anything else not working, what year is it??
 
I've had it bout just over a month and they have never worked just getting round to finding out why I had another look and I have the plug there but no switch can I bridge the wires to make them work. It has 2 purple and 2 red
 
I take it you want one of these



YUF101590. £24+VAT from Craddocks or £37.90+VAT from paddocks

Is there a hole for it in the switch panel
 
From the wiring diagram in Haynes it's the red ones you're after, purple ones are for the interior light:)
 
Before buying a switch you may not need (the loom might just have the plug) I'd:

a) Check the continuity of the earth (thin black wire)

b) Trace the feed (the dash bulbs have a wire running from each to the next) back to the headlamp switch and check for continuity
 
I take it you want one of these



YUF101590. £24+VAT from Craddocks or £37.90+VAT from paddocks

Is there a hole for it in the switch panel

Ye that's what I have missing there a whole for it and the plug is there just no switch gonna try the 2 red wires and see if I get some light
 

Similar threads