teddywood1

Well-Known Member

• Dec 31, 2011

• #1

Has any body had this problem I usually can sort it myself but this one has me a little foxed my wipper motor will not do the intermintent wipe and wash wipe I have tried my wipper motor on the wifes freelander and it works ok even my origal one because i brought a second hand one thinking it was the motor I can hear the relay click on intermitent and I have 1st and 2nd speed but that is it if it was my switch then surly the relay would not work I.E. no clicking any body know
happy new year to one and all including rusties

 

C

cuza68

New Member

• Dec 31, 2011

• #2

the relay is clicking as you say but is there any output to the motor?

 

teddywood1

Well-Known Member

• Dec 31, 2011

• #3

I do not think so going dark now and daughters 40th birthday party tonight so the boss has said get cleaned up or i can not use her freelander for testing

 

Last edited: Dec 31, 2011

teddywood1

Well-Known Member

• Dec 31, 2011

• #4

just to note I did a test the other day and there was a trace of current getting through but probably not enough to spark into life

 

Last edited: Dec 31, 2011

Mantamad

New Member

• Dec 31, 2011

• #5

RAVE talks about a CCU (Central Control Unit) to operated the intermittent wipe - it might be this unit that is faulty

 

teddywood1

Well-Known Member

• Jan 1, 2012

• #6

hi thanks for that I am going to have a look at that it is undenieth the fuse panel under the dash on drivers side

 

S

s1mon

New Member

• Jan 1, 2012

• #7

It might be worth checking out the switch in the stalk as well.

Mine occasionally doesn't work in intermittent wipe. Usually moving the wipers to speed 1 then back to intermittent will start them going. Its not a frequent enough problem on mine to bother trying to fix it.

Does the wiper do a single flick wipe ok? Normally if that works then intermittent wipe in the motor should work as well.

Also, try moving the variable intermittent wipe collar on the wiper stalk to every position to see if that makes a difference.

 

Last edited: Jan 1, 2012

teddywood1

Well-Known Member

• Jan 1, 2012

• #8

hi thanks i have tried the single wipe no problem and have tried speed one but nothing then today i left it on intermintent for 20 miles and it did it 3 times it must be a loose conection if it is dry tomorrow I will have a look failing that I will have to borrow the wifes garage my three are full up
thanks for the reply

 

Mantamad

New Member

• Jan 1, 2012

• #9

Yes certainly worth checking the wiper control arm first but if no luck, is it possible your CCU could have got wet from a windscreen leak?

 

teddywood1

Well-Known Member

• Jan 2, 2012

• #10

hi thanks for your help will check it asap