M

mercman15

New Member
i was going down motor way about 60 ish when suddenly the was no drive
aa told me my cluth wach was gone. i know it not the role pins in clutch fork as ive done them before so took box out yesterday and clutch looks fine

i selected gear in box when out and the shaft not turnin (oh its 5 speed manaul )

thanks for any help
 
mercman15 said:
i selected gear in box when out and the shaft not turnin (oh its 5 speed manaul )
Click to expand...

You are best off putting it into diff lock as well. Then when a gear is selected both front and rear output flanges on the transfer box should turn.

If not then next thing would be the check the splines on the output shaft of the main box into the transfer box. Easy enough to do. Remove the 6 bolted round cover on the rear of the transfer box just but the hand brake drum. Look in and you will see a shaft inside a gear. If the shaft spins but the gear doesn't move then you have found you problem.

HTH
 
Stupid thought probably, but could it not just be that the transfer box has somehow selected neutral?????
 
mercman15 said:
was in main shaft broke in two oh dear
Click to expand...

It's taken you 2 and a half years to tell us this??!!:eek:

So what's gone wrong on the rangie this time which brings you back here for help that we won't get a reply from for another couple of years when something else breaks!?
 
You must log in or register to reply here.

Similar threads

C
L322 td6 auto 2005 No Drive when hot
Replies
12
Views
1K
chu017
C
M
Land rover series 3 clutch/gearbox issue, I just can't get it in gear
Replies
7
Views
1K
tottot
tottot
dag019
LT77 clicking loudly in 5th gear
Replies
7
Views
738
Skolmate
Skolmate
T
Gear selection problem
Replies
3
Views
796
miktdish
miktdish
BroncoJr
D2 V8 Auto no drive when hot
Replies
5
Views
781
BroncoJr
BroncoJr