marcostriumph
Member
Hi Everyone and happy New Year.
I have the following problem:
2,5 td manual. Have changed clutch, complete set, OEM.
Drove off, and after 10 km lost all drive. Engine runs fine. No gears at all, no reverse. No difference if high or low in transfer box.
Now before pulling the box again, in case the clutch has exploded or the centre of the clutch actuator has fallen out, I recall someone said check the input shaft first. Now I don't remember how that worked.
Thank you for any input.
I have the following problem:
2,5 td manual. Have changed clutch, complete set, OEM.
Drove off, and after 10 km lost all drive. Engine runs fine. No gears at all, no reverse. No difference if high or low in transfer box.
Now before pulling the box again, in case the clutch has exploded or the centre of the clutch actuator has fallen out, I recall someone said check the input shaft first. Now I don't remember how that worked.
Thank you for any input.