N

NINETYMATT

Member
Hello. Just got my ninety back from having some work done and got told I have no brake lights. I found what I believe to be the brake light switch with 2 disconnected wires coming from it. I've attached some photos and wondered if anyone could confirm it is the switch and whether the two wires I've located coming out of the bulkhead in the other photos should be connected to the switch.? Thanks in advance for any help you can give me.

Matt
 

Attachments

  • image.jpg
    image.jpg
    279.5 KB · Views: 182
thats the brake light switch wires for it are green and green with black stripe iirc,there is only 1 pic but wires shouldnt be far away coming out of bulkhead loom gromit
 
Thank you very much. Reason I think is that the landy is just back from having a bulkhead repair and I think these got missed in the rebuild. Thanks very much for the reply I'll go and connect them up.
 
NINETYMATT said:
Thank you very much. Reason I think is that the landy is just back from having a bulkhead repair and I think these got missed in the rebuild. Thanks very much for the reply I'll go and connect them up.
Click to expand...

check to make sure they didn't get melted during the welding repairs.
 
You must log in or register to reply here.

Similar threads

T
No Brake lights and reversing lights help please
Replies
11
Views
1K
Stanleysteamer
Stanleysteamer
S
1988 90 replacing lights with LEDs and have lots of questions
Replies
5
Views
734
sleepybear
S
J
Kenlow wiring mess
2
Replies
22
Views
871
dag019
dag019
K
Black smoke and no power
Replies
4
Views
971
lynall
L
V
P38 2.5 weird modification...
Replies
3
Views
605
Datatek
Datatek