B

b11kor

New Member

• Jun 27, 2008

• #1

Just bought a new towbar and fitted it no probs, no drilling nice and easy . Problem is paid an extra £40 for a plug in wiring kit which is suppoed to plug into a blanked off connector in the rear light area.

Problem is there is only 1 blanked off connector which has all black wires going in which is earthed to body, and is total different to receiving connector.

Any ideas please?

Thanks

Chris

 

Optimus Prime

Well-Known Member

• Jun 27, 2008

• #2

welcome t' forum

are you looking at the multiplug connector which is behind the rhs boot trim on the drivers side ?

 

andytd4auto

New Member

• Jun 27, 2008

• #3

it should be stuffed down the gap where you can see the earth wires!!

also have you got the relay?

 

B

b11kor

New Member

• Jun 27, 2008

• #4

Yep, I am looking in the rear drivers side but what gap? I have found 3 connectors which are all used up, but not one with a blanking plate! will go in Garaage and have a 'feel around'

 

andytd4auto

New Member

• Jun 27, 2008

• #5

when you look behind panel you'll see the inside of the outside (?) of the car.

there will be a brace plate to which the earth block is fastened.

fish about behind there and you should find it tucked right out of the way.

do a search on here for towbar wiring cos someone uploaded the proper instructions from landrover!!

 

B

b11kor

New Member

• Jun 28, 2008

• #6

thanx Gents, found it and all fitted and works a treat! Off to the races now!!