C

Chickenhead19

New Member
Hi. I currently own 3 landrover. A disco 2 disco 3 and a defender 90.
So not really new to landrovers but I'm boggled with a height sensor fault on the disco 3.
I had both sensors on the left down and a front right airbag leak replaced all 3 parts and still have the rear playing up. When plugged in to calibrate i have a code saying high voltage on this sensor checked and sorted all the wiring but now have more faults than when i started. Park brake fault suspension fault and many more have come up on dash. Any advise would be appreciated as i am at a loss with it
Thanks
 
I have checked the battery as i know that can cause problems. Seems fine and have charged it overnight.
Thank you for the reply
 
Chickenhead19 said:
I have checked the battery as i know that can cause problems. Seems fine and have charged it overnight.
Thank you for the reply
Click to expand...

I reckon you have max 1/2 to 1 hour with ignition on before the battery is tired, beware sitting for to long with radio and interior lights on!

Genuine sensor/s or pattern part?
Iirc the sensors are either side or corner specific.

What codes have you got? screen shot etc.
 
Suspension fault rear height sensor
Auto adjusting lights
Park brake
Transmission fault
Rear Height sensor has high voltage

I haven't took any pictures but will get some possibly tomorrow.

I will recharge the battery as I have been trying to solve this problem for a while on and off and its been stood for at least 3 days but these all came on instantly after changing the rear sensor When battery was fully charged.
Got a mechanical friend coming wednesday to help out just want to rule out what i haven't already done.
Cheers
 
I have managed to get these pictures. I have fully charged the battery and nothing has changed.
Going to try and clear the codes on Wednesday for the 3rd time.
any advise would be greatly appreciated.

20210405_094253.jpg
20210405_094252.jpg
20210405_094253.jpg
20210405_094252.jpg
20210405_094250.jpg
20210405_094228.jpg
20210405_094247.jpg
 
Unfortunately my diag has given up the go but my mates a mechanic and is coming again on Wednesday to try and clear them. We have already done this 3 times prior but they won't clear. The rear sensor we have changed won't calibrate as its reading a high voltage code to the sensor checked and sorted the wiring as a wire had broke but it seems i may be missing something. As never had all these light and faults before i changed both the sensors front and back. Will update again wednesday when we have plugged it back in
 
You must log in or register to reply here.

Similar threads

zpbassham
Ride Height Sensor Replaced
Replies
2
Views
751
brianp38dse
brianp38dse
L
Intermittent cps fault accompanied by transmission going to limp mode and steering angle fault
Replies
2
Views
155
lr3driver
L
F
New to the group
Replies
2
Views
454
brianp38dse
brianp38dse
B
Range Rover Sport 2009 HSE Diesel Auto
Replies
3
Views
680
skullbiker
S
Blob
L322 Adaptive Dynamics Height Sensor issue (but it works...)
Replies
2
Views
691
Graculus
Graculus