Steve Lister
New Member
Hi pick my first Disco 300tdi Auto up a week on Sat wanted one for years looking forward to Modifying it over next few years so thought it was best to join this Forum to get as much help as possible
Colthebrummie
Well-Known Member
Hello Steve, welcome to the site.
Col
Col
Steve Lister
New Member
The disco has bee owned by a mate of mine for last 4 years its a import but full uk spec He is a absolute perfectionist when it comes to anything he owns Chassis has been wax oiled 6 times since he had it, recent new steering rack,, alternator ,all belts and oils done ,Aircon fully overhauled ,water pump replaced about 6 months ago ,new head lining to be fit before i pick it up ,Tow bar fitted just needs slight attention to rear wheel arches on inside of rear doors where there is a very small amount of surface rust which i will sort before winter .Can anyone tell me how the diff lock works on this model please
blue beasty
Leaks an prone to bits dropping off
Little high/low stick to the left
Steve Lister
New Member
No mate i know where it is what i meant is how mechanically it works as i am led to believe it is not a true diff lock
blue beasty
Leaks an prone to bits dropping off
It's a centre diff lock, locks the front and back props together but the axle diffs are still open.
Steve Lister
New Member
Thanks for that any way of modding it so the axle diffs can be locked ?
jamesmartin
Well-Known Member
yes ,several but all cost ,this isnt a bad one
https://www.google.co.uk/url?sa=t&r...r.html&usg=AFQjCNFtNwUXl8U_KEAsEy5M25ZeilOWAw
blue beasty
Leaks an prone to bits dropping off
There's various after market lockers available but that's a subject in its own right.
Loads of info if you do a forum Search then you can start a thread if you have specific questions
