Welcome:).

Got pics of said ton of questions;). coz we like pics:).

J
Well my first question is how do I build hydronic pressure / bleed the clutch system as currently I’ve put a new spring on and it throws itself against the floor rather than pushes up. People have said it’s fitted correctly however it looks bent to me.
52525D0A-956B-43BF-9932-F7593A81FB27.jpeg
 
Well my first question is how do I build hydronic pressure / bleed the clutch system as currently I’ve put a new spring on and it throws itself against the floor rather than pushes up. People have said it’s fitted correctly however it looks bent to me.View attachment 279054

Not the bits that are wrong:rolleyes: the shiny bit on the top, from a distance if it makes it look better:p:D.

J
 
Well my first question is how do I build hydronic pressure / bleed the clutch system as currently I’ve put a new spring on and it throws itself against the floor rather than pushes up. People have said it’s fitted correctly however it looks bent to me.View attachment 279054
Not convinced about the spring, but not certain, so leave that until someone else comes along.

For bleeding, simple gravity bleed with a tube on the slave cylinder nipple seems to work best.
 
The spring does a job. If the springs job is to return the clutch to the upright position and you are saying your pedal doesn't return and the spring doesn't look right, I think it's safe to say the spring isn't fitted right.

I haven't ever changed mine, or even seen it tbh as its recessed as it should be. The only advice I can suggest is take it off and put it back on following the workshop manual perhaps.
 

Similar threads