johnson gary
Member
Hello, been a while since I've posted here, but have used lots of info from past threads.
Today I installed a new radiator into my defenderTD5 2002. All hoses connected as from the old radiator. As I was filling with coolant noticed coolant pouring out from bottom left pipe. The radiator is exactly the same as the old and this little 5mm pipe at a slight angle was not connected to a hose. On the opposite side is a hose lower, which I understand comes from the fuel cooler.
Should this small pipe be blocked and with what?? I imagine on the old it is blocked off.
But if there is a hose going in on the opposite side coming from the fuel cooler should there be a return?
Confused thought I'd have this wrapped up today and driving around.
Today I installed a new radiator into my defenderTD5 2002. All hoses connected as from the old radiator. As I was filling with coolant noticed coolant pouring out from bottom left pipe. The radiator is exactly the same as the old and this little 5mm pipe at a slight angle was not connected to a hose. On the opposite side is a hose lower, which I understand comes from the fuel cooler.
Should this small pipe be blocked and with what?? I imagine on the old it is blocked off.
But if there is a hose going in on the opposite side coming from the fuel cooler should there be a return?
Confused thought I'd have this wrapped up today and driving around.