hesketh786

hesketh786

New Member
[GALLERY=][/GALLERY]Hi all,

I have recently bought a 1986 Range Rover Classic 4 door

I will be fully restoring it and making it better in the process.

Any major things to look out for when restoring ?

The doors and wings are all very good, there is some rust/corrosion to the outriggers which will be getting replaced.

Many Thanks

H

Any recommended shops or sites to buy parts from ?
IMG_4690.jpg
IMG_4691.JPG
IMG_4692.JPG
 
It’s a long time since I looked under a classic range Rover
But from memory not only is the chassis an issue the body was a big problem lots of hidden places for corrosion to take hold
 
Hi and welcome!

I used to have a two door Range Rover with a similar interior. Yours looks quite tidy on the outside, but they do rust well underneath, as mentioned.

Try the likes of Craddocks, paddocks, brookwells, etc. For used parts, look at eBay and FB marketplace.
 
thank you all for your replies
yes your all spot on regarding the rust, i will be taking my time stripping most of it all back and repairing the problems !

Thank you guys
H
 
Hello all

Update to all
The car is now at my house - had to make space for her !

first thing i noticed coming off the transport truck is that it has no brakes !

Will be doing a full service & interior & exterior clean
Then
1) sparks
2) all filters - carbs, air, pollen, fuel, oil
3) oil change
4) coolant change and clean out rad
5) change brake fluid and bleed out

is there anything else you wizards suggest to add to the list above

thanks
H
 

Attachments

  • 3C58EFDC-30B4-42DB-A1ED-AF51A9F27576.jpeg
    3C58EFDC-30B4-42DB-A1ED-AF51A9F27576.jpeg
    608.9 KB · Views: 95
If it’s not moved for some time, the callipers might also be seized so factor in new or stripping down and rebuilding. It might benefit from new discs and pads too.

I know it’s not a Landy but nice G-wagen!
 
hesketh786 said:
Hello all

Update to all
The car is now at my house - had to make space for her !

first thing i noticed coming off the transport truck is that it has no brakes !

Will be doing a full service & interior & exterior clean
Then
1) sparks
2) all filters - carbs, air, pollen, fuel, oil
3) oil change
4) coolant change and clean out rad
5) change brake fluid and bleed out

is there anything else you wizards suggest to add to the list above

thanks
H
Click to expand...
IMG_20220405_160752_1~3.jpg
IMG_20220405_173753_1~2.jpg
IMG_20220406_093242_1~2.jpg

Enjoy your new present.
 
hesketh786 said:
is there anything else you wizards suggest to add to the list above
Click to expand...

IMHO, first port of call with that needs to be checking structural integrity ... from one of the pics above, it looks like the OSF A-post and cill need some love :)
 
@Knappster its been sat for a fair few months, thanks for the info buddy i will do that also to the brakes. and thanks great cars the G's are !

@saxavordian, nice drawings ! and thank you !

@Disco1BFG yep you have seen it right away, a chap in Congleton makes the panels, i'm going to replace both inner and outer sills (both-side), battery box, and maybe 2 rear wheel arches !

what oil do you suggest to run - 20w50 i've been reading fully or semi synth ?

let the fun begin..

thank you all !
 
hesketh786 said:
@Disco1BFG yep you have seen it right away, a chap in Congleton makes the panels, i'm going to replace both inner and outer sills (both-side), battery box, and maybe 2 rear wheel arches !
Click to expand...

It's scary... I've used Easy-On panels from Froggatts in Bosley Cross for both our D1's .... been very pleased with the fit - close enough to go and collect too ;)
 
hesketh786 said:
what oil do you suggest to run - 20w50 i've been reading fully or semi synth ?
Click to expand...

What ever the handbook says..... I run our 300Tdi's on fully synthetic 10W40 .... Some folk says synthetic gets past seals and such, but this is not my experience .... if it's leaking it needs fixing ...:)
 
@Disco1BFG thanks for comments buddy, appreciated. And indeed sorry not Congleton but Macc ! will be taking a trip down very soon. !

@RangeRoller dt, indeed 3.5L v8 petrol carb. Yes will be quite a project ! so far ;
Inner & outer sills (both sides)
Rear wheel arch (both sides)
Front inner wings (both sides)
will need to be replaced although rear wheel arches are actually quite solid, might. as well do them whilst i'm there.

The 2 rear passenger doors don't open - any idea why ? Maybe a stuck rod or just seized up ?

thanks all
 
You must log in or register to reply here.

Similar threads

F
New from France !
Replies
1
Views
482
Stanleysteamer
Stanleysteamer
M
Mak1959 New member
Replies
2
Views
775
Mak1959
M
J
New member Mid Wales
Replies
18
Views
1K
JohnKaye
J
D
New member/ new owner - Auto gearbox issues
Replies
1
Views
636
brianp38dse
brianp38dse
I
Series 3 Diff Pinion Spacer
Replies
7
Views
517
steve2286w
steve2286w