T

tilly2

Well-Known Member
My disco is sagging on one side, by about 2 inches at the front. It always has, and I knew it when I bought it. Looking to replace the front springs, shocks, steering damper, Delphi ball joints and anything else that seems worn.

I dont want to lift the vehicle in any way, so can anyone recommend a good set of springs. I really dont want Britpart.
 
I did this on mine last year. Used standard springs (for me the recommended was REB000330) with Bilsteins (also the steering damper).
Very satisfied with the result.
 
B6's ? How did you find them. Was looking at them. But, I will be having an OME damper on the steering...
 
Sorry but genuine is your best bet with standard heights. Shocks are a bit of a minefield but all i can say is britpart super gaz are a hard ride.
 
tilly2 said:
I mean find them as in against the originals.... lol
Click to expand...
Sorry for missunderstanding, I am not native english speaker:)
Originally I had 2" lift by using britpart set. So I can not compare to that (shocks were out anyway). First I installed KYB springs and Monroe shocks and found them too soft and one side of my car was a bit down (about 1" compared to other). The KYB was also the standard one but for pre-facelift model so I have changed them to the correct one which together with Bilsteins give much better feeling and also the car sits higher and even.
 
You must log in or register to reply here.

Similar threads

moorsman61
Rear shock
Replies
7
Views
720
300bhp/ton
300bhp/ton
MAF Diver
Disco 2 Do you need extended shocks for a 0.8 inch lift at the front? Air suspension in the back (SLS)
Replies
13
Views
1K
MAF Diver
MAF Diver
Kingshill-Rover
Series 3 LWB in Buckinghamshire - Front Springs
Replies
11
Views
954
Rangieman123
Rangieman123
Flossie
Is it possible to renew the front springs...
2
Replies
21
Views
1K
Chalky.
Chalky.
A
Rear shocks + springs
2
Replies
22
Views
1K
Chalky.
Chalky.