N

Nickvernon

New Member

• Feb 19, 2012

• #1

Hi I need some help. Currently have a defender 90 single cab. Have seen a few 90s' where the cab has been slightly extended, I'm struggling with the space and wondered if anyone knew how hard it was to extend, and what would need to do. I can do the basics but this is but this could be too technical for me, so would also appreciate if see could recommend a company tha could he work with 50 miles of Manchester. Thanks nick

 

Pikey

Dummy Ejection Facilitator..

• Feb 19, 2012

• #2

110 roof and sides cut to where yu want them to go then attach rear of a 90 truckcab

 

V8jon

Well-Known Member

• Feb 20, 2012

• #3

I did it on my series,I know it's not a 90 but the principal is the same. I used a hardtop and cut it down to suit,I cut it about 6" from the rear of the doors and cut it about 6" from the back leaving me with two pieces,I then mated the two together overlaping them and rivited them together. The rear window is an old safari rear door that I cut down to fit and bolted it on.

 

brock

New Member

• Feb 20, 2012

• #4

i did the same as above, but hinged back window so it opens like a tractor