R

Rsands

New Member
Hi guys, I've got a front parking sensor problem with my L322 2010 conversion.

It started with a broken wire wire with the old original 2004 sensors, so I fixed the wire and obviously bought all new 2010 sensors.

All sensors are working and I can hear the clicking on each sensor.

**This is the strange bit**

When the engine is off and parking sensors are engaged everything works fine and as it should.

When the engine is on all I get is a constant beep ?

Does anyone have any suggestions, could it be bad sensors, bad wiring? Just strange it only doesn't work properly and I get the constant beep when the engine is on...
 
System voltage will be higher with the engine running so that may affect things, maybe your new sensors run at a lower voltage.
 
When you say you did a conversion what did you actually change?
Our 2011 has front and back but you had that in a 2004 so what’s changed;)

Also which 1 of the sounders is bleeping when you turn engine on? Or both?

According to manual (although I have not actually noticed but will listen next time) there are 2 sounders 1 in instrument pack and 1 in the rear. Obviously front sounder for front bleepers and back for back:)

J
 
Not noticed 2 beepers in my 2005, just a high pitch for the front and a lower one for the rear. If the later model has 2 beepers then it must also have a different control unit.
 
backinblack said:
Not noticed 2 beepers in my 2005, just a high pitch for the front and a lower one for the rear. If the later model has 2 beepers then it must also have a different control unit.
Click to expand...

They mention two tones and two bleeper in my manual so you can tell if it’s front or back bleeping, that’s all I can say at the moment.

J
 
I need to get my wife at the front and my son at the back so I can see where the beeps come from as I run over each of them. I suspect the majority of beeps will be the front :D
 
backinblack said:
Another quickie with google shows different control modules for early and late models.
Click to expand...

What I don’t understand is you have front and back 2005. I have front and back 2011. What’s different. And more importantly what did OP change in said “conversion “:confused:

J
 
marjon said:
They mention two tones and two bleeper in my manual so you can tell if it’s front or back bleeping, that’s all I can say at the moment.

J
Click to expand...

Parked in a tight space this morning so both front and back were beeping, sure enough there seems to be 2 bleepers on a 2005.
 
Don’t bother doing conversions your asking for issues especially when headlights etc are not compatible. See powerful uk videos on there site and they show anumber of items about upgrades. Personally if I want a 2012 RR instead of my 2002! I’ll just buy one.
 
You must log in or register to reply here.

Similar threads

B
New parking sensors back - still not working.
Replies
1
Views
442
Graculus
Graculus
Pablo63
Help please Parking aid issues.
Replies
14
Views
2K
JokerUK
JokerUK
R
Range Rover Supercharged Oxygen sensor 3 problem
Replies
14
Views
2K
biketeacherdave
biketeacherdave
J
Front Parking Sensors L322 2008
Replies
1
Views
481
Propman
Propman
R
What L322 to avoid?
2 3
Replies
52
Views
2K
Mark Piercy
Mark Piercy