Nohave · Dec 9, 2013

Hello,

I am a newbie here. I just bought an OBD2 wireless bluetooth scanner.
I scanned my hippo and the Fault log Manager shown:

- P0171- Powertrain
System too lean ( Bank1)

- P0174- Powertrain
System too lean (Bank2)

- P0325- Powertrain
Knock Sensor 1 Circuit (Bank1 or Single Sensor)

I don't know what's meaning of these faults and if I can still drive as I have to
drive long distance tomorrow.

I would highly appreciate all advice.

Many thanks.
Paul

West Slope Rover · Dec 9, 2013

The Google Fu is weak in this one.

Try this:https://www.google.com/search?q=+P0...rtrain&rls=org.mozilla:en-US:official&spell=1

Nodge68 · Dec 9, 2013

what engine? I'm assuming it's a V6?

bukko · Dec 9, 2013

Nodge68 said:
what engine? I'm assuming it's a V6?

If it isn't, there's something seriously amiss!

Nohave · Dec 9, 2013

West Slope Rover - Thanks , this help a lot.

Nodge68 - it's KV6.

Nodge68 · Dec 9, 2013

have you cleared the faults?

Nohave · Dec 9, 2013

I haven't clear the faults , in fact I don't know how to clear them.:Cry:

Nodge68 · Dec 9, 2013

Nohave said:
I haven't clear the faults , in fact I don't know how to clear them.:Cry:

What software are you using to read the fault codes?

Nohave · Dec 10, 2013

Well I am using Torque Pro ( Google play for android ).

Nodge68 · Dec 10, 2013

Nohave said:
Well I am using Torque Pro ( Google play for android ).

Clearing the fault codes with Torque is easy.
Once the faults have been read, click the menu key and select Clear ECU Faults on the pop up menu. It takes a few seconds to do.
Once cleared you can see if the faults log again.

Nohave · Dec 10, 2013

The problem is I could not find "Menu" key. I uninstalled the program ( Torque ) and installed again,
there is no Menu ???

Nodge68 · Dec 10, 2013

Nohave said:
The problem is I could not find "Menu" key. I uninstalled the program ( Torque ) and installed again,
there is no Menu ???

What device are you using?

Nohave · Dec 10, 2013

Samsung Note 3 :confused2::confused2:

bukko · Dec 10, 2013

Like this:
Clearing Mustang GT Fault Codes via Android Torque App and Bluetooth Dongle - YouTube

Nodge68 · Dec 10, 2013

Once the fault is displayed, touch the left soft key on the note and you should get a pop up menu. Select clear fault codes and wait

Nohave · Dec 10, 2013

Nodge68 Many thanks , I found the menu key now.

Nohave · Dec 10, 2013

Bukko Many thanks.

Nohave

New Member

West Slope Rover

Well-Known Member

Nodge68

Well-Known Member

bukko

Well-Known Member

Nohave

New Member

Nodge68

Well-Known Member

Nohave

New Member

Nodge68

Well-Known Member

Nohave

New Member

Nodge68

Well-Known Member

Nohave

New Member

Nodge68

Well-Known Member

Nohave

New Member

bukko

Well-Known Member

Nodge68

Well-Known Member

Nohave

New Member

Nohave

New Member

Similar threads