andylynne1
Member
hi all i removed the head so i could replace the vavle seals sent the injectors away to be done. the engine is now all rebuild turns over but will not start as any one got any idears cheers andy
mrchurchill109
Active Member
Bleed the injectors, make sure you have the fuel stop in the proper position.
Just crack off the fittings at the injectors and crank it till you see fuel at the fittings. Retighten and try it again.
Just crack off the fittings at the injectors and crank it till you see fuel at the fittings. Retighten and try it again.
andylynne1
Member
hi cheers for that ive done that before i posted still nothing. so am a bit suck really to what it is
mrchurchill109
Active Member
If you are getting fuel to the injectors and the valves are operating then I would suggest crankiing speed is deficient. Charge the battery and try again. Also check that the glows are doing their thing properly, though an engine in goood nick should fire without them with a bit of cranking.
You did readust the valves properly, right?
Alan
You did readust the valves properly, right?
Alan
andylynne1
Member
yeah re set the valves. getting little puffs of grey white smoke out the exhaust alan
cheers andy
cheers andy
mrchurchill109
Active Member
If you're getting puffs out the exhaust then you are getting fuel in the right places. Sounds to me like crankking speed and/or glow plugs not working.
Charge the battery and/or jump it off something with a BIG battery and then see what happens.
Charge the battery and/or jump it off something with a BIG battery and then see what happens.
andylynne1
Member
going to charge the battaery up. i fitted full new set and heater plugs so think ill try the battery of the car
