sp33der

sp33der

New Member
Ah well, seems I need to replace both gearbox and transfer box (and the clutch for good measure!) Price quoted to me over here is about equivalent to distance to milky way and back. Tempted to look around to see if thete's owt in the UK that I could ship although the time and dosh for shipping may prevent that. Has anybody any experience of shipping heavy items overseas?
Problem that they showed me is the splined shaft that joins the two, the male end from the gearbox is very visibly worn and the female bit in the transfer box is worn smooth.

All helpful suggestions welcome! Anybody about to head down to Spain and have these items lying around and can pop em in their suitcase? :D Gotta larf....or I might cry.......
 
sp33der said:
Ah well, seems I need to replace both gearbox and transfer box (and the clutch for good measure!) Price quoted to me over here is about equivalent to distance to milky way and back. Tempted to look around to see if thete's owt in the UK that I could ship although the time and dosh for shipping may prevent that. Has anybody any experience of shipping heavy items overseas?
Problem that they showed me is the splined shaft that joins the two, the male end from the gearbox is very visibly worn and the female bit in the transfer box is worn smooth.

All helpful suggestions welcome! Anybody about to head down to Spain and have these items lying around and can pop em in their suitcase? :D Gotta larf....or I might cry.......
Click to expand...

Hiya matey, long time etc etc. Got drive train troubles then.

Have you considored rebuilding the transfer box with a new input shaft? Relatively straightforward and the bits are much easier to transport from jolly old Angleterre?

Just had a look on Microcat and Rave but can't find the correct names for the bits, but a quick call to Ashcrofts might help you - even if it's only to get the right names for the components in question?
 
Hi sp33der..i may be driving to Alicante in the next month or so...where are you in spain?
 
Evening fellers, thanks for ideas. Hi Dave, mange tout mate, mange tout. Thought about repair job but neither me nor the Russkie garage man are convinced that there aren't further problems within the box(es) - something deffo went bang pretty loudly and shook the whole car so currently I'm sticking with the idea of replacement but the cost is massive. Prob cheaper for me to pay someone to drive a rusty condemned Disco down here and I give em 3 or 400 quid for it and pay their air fair home and use the car for spares!! Now theres a thought! Anyone who's about to fail their MOT fancy a last road trip? :)
Appreciate the offer Mr Storm but I guess I need the parts asap as me Disco is sitting on a ramp in a garage at the mo undrivable so I guess they will want it sorted and outa the way soon as pos. And I'm having to rent a car at the mo so the kids can go to school! I'm about an hr and a quarter North of Alicante btw.

Cheers


Rich
 
Know a fella who has a garage near Velez Malaga, hes got a couple of Discos for sale, both drive, he wont want much: Paul Aitkin 952030878.
 
hi ya
i live near alicanti and i know a very good 4x4 breakers with a good selection of parts for land rover iand i believe they could deliver to you.i will get you the number tomorrow.andy
 
speak with bmp42....

he's in Portugal and he sorted my uncle over there with an engine, as my uncle manged to melt the one he had....
was cheapear than me finding one here and shipping it over to Portugal...

might be cheap sending a box from portugal to spain..
 
Thought of that! :) PM'd him the day after it happened but he must be out and about, not heard from him. Thanks though! As always, thanks to all who offer help. It's what makes this site better than the rest!
 
sp33der said:
Thought of that! :) PM'd him the day after it happened but he must be out and about, not heard from him. Thanks though! As always, thanks to all who offer help. It's what makes this site better than the rest!
Click to expand...

just spoken to him through msn.......was at his garage earlier this month......think he has a few 200tdi as well as 300tdi.......a few LT77, R380.....and definitely a few LT230....as was helping him rebuilding them..:D

pm me your email, and contact number, and I'll ask him to ring/email you asap....
 
sent message to bmp42......let me know if he hasn't contacted you by tuesday...will give that old git a big kick in the ass.....
 
hi sp33der
ive sent you a pm on about that 4x4 breakers near me in spain let me know how you got on cheers good luck
andy
 
Well, 'new' boxes arrived yesterday, possibly being fitted today. Got them from UK in the end, was almost half the price of best I could do here. Ta to all who offered assistance. Just wondering - I have heard talk of "the later cross drilled type" for the transfer gear. When did this come in does anyone know? I'm guessing this means there is a pin or something thru to stop the splines wearing out?
Cheers
Rich
 
You must log in or register to reply here.

Similar threads

pikefly
New Gearbox
Replies
10
Views
651
steve2286w
steve2286w
N
Noise from gearbox/transfer box
Replies
14
Views
2K
NeilsWheels
N
B
Loud bang, grinding noise , no drive. Gearbox , transfer box or driveshaft ?
2 3 4
Replies
73
Views
7K
badlander
B
A
Discovery 2. Question about auto box replacement, help most appreciated!
Replies
5
Views
1K
Stanleysteamer
Stanleysteamer
P
As a query how difficult is it to replace engine to gearbox seal as it appears I have leaks around the engine sump and gearbox to engine.
Replies
3
Views
639
tilly2
T