L

lrjohn

Active Member

• Aug 14, 2022

• #1

Hi all, this question has probably been asked many times so sorry if I'm repeating it but I like to absolutely confirm which NANOCOM diagnostic tool will allow me to reset suspension from air to coil after a refit and also generally be used for items such as bleeding the ABS – as well as course as reading fault codes.

It appears the one I need is NCOM 13 but can anyone confirm that in terms of having had experience in resetting suspension and also the ACC?

Any advice much appreciated

Thanks

 

swatts70

Active Member

• Aug 14, 2022

• #2

The Nanocom you need is the one specific to your vehicle. The evolution unit is the same, its different unlock codes that allow it to work with different landrover models.
I have a Nanocom evolution that was bought for use with my Discovery 2 td5. I purchased a unlock code for my Freelander 2 (and the correct connection cable) and now I can use it on any Disco 2 TD5 or Freelander 2.

 

sierrafery

Well-Known Member

• Aug 14, 2022

• #3

Would be hard to confirm which nanocom you need as long as you didnt tell what kind of Disco you have

 

L

lrjohn

Active Member

• Aug 14, 2022

• #4

Whhops! Disco 2, though the reference to air to spring and ACC probably gave that away

 

swatts70

Active Member

• Aug 14, 2022

• #5

Discovery 3 and 4 have air and can be converted to springs as can range rovers.
Do you mean ACC or ACE?
So not that clear from original post.

 

sierrafery

Well-Known Member

• Aug 14, 2022

• #6

lrjohn said:

Whhops! Disco 2, though the reference to air to spring and ACC probably gave that away

Click to expand...

As @swatts70 said air springs have many discos but none of them "ACC" though if i guess that it's Td5 not V8 then you need this one https://www.nanocom-diagnostics.com/shop/product/ncom02 , that NCOM13 you mentioned is only an unlock code if you already have nanocom for other modell

 

Last edited: Aug 14, 2022

JUKE179r

Well-Known Member

• Aug 16, 2022

• #7

Once you get the Nanocom:
DISCOVERY II > Td5 or MOTRONIC > SLABS > SETTINGS > change Suspension Type from Air

to COIL

Hit the green right button > tap WRITE SETTINGS > Done!