DPG213

Member

• May 7, 2020

• #1

slightly obscure but I was wondering what the panel is called, if there is one, that covers the fuel hose from the filler cap on the underside of the vehicle? And where to get one?
Filled the tank by removing the seat previously but have since installed the traditional exterior filler cap with pipes. Every time it’s wet now the tyres flick up water into the cab! In wellies most of the time but not great when wearing my dancing shoes.

 

Attachments

• 
  8F8260D8-4A89-4169-BF06-B2376FCCFCFF.jpeg

  287.1 KB · Views: 129

Bobsticle

De Villes Advocaat

• May 8, 2020

• #2

https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/282166037607

Look around for one of these.

And no. I wouldn’t pay that much either.

 

DPG213

Member

• May 8, 2020

• #3

I’ve installed one of those on the inside but it’s the underside that I need sorting where the pipes go through the bulkhead. I’ve attached a picture. Could this been adapted for that space?

 

L

lynall

Well-Known Member

Full Member

• May 10, 2020

• #4

I think this is what you need, seals top of tank to under side of flat plate behind seat?

https://www.johncraddockltd.co.uk/504233-jc3-sponge-for-top-of-fuel-tank-1958-1998.html

 

Bobsticle

De Villes Advocaat

• May 10, 2020

• #5

Not sure there is one for a custom retrofit.
Best thing I can suggest is a sheet of tin and a big ammer.