andy20166

New Member

• Jun 28, 2013

• #1

Can anyone tell me what the sensor is in picture, the wiring has a socket/connector with a blanking plug in it (not quite visible in photo) it then goes into the ECU box.

When car recently in the local garage mechanic there thought it was some kind of modification but wasn't sure.

Thanks

 

Attachments

• 
  IMG_20130628_210218_636.jpg

  209.1 KB · Views: 497
• 
  IMG_20130628_210300_702.jpg

  146.4 KB · Views: 318

Optimus Prime

Well-Known Member

• Jun 28, 2013

• #2

think this might be the upgraded fuel rail harness modification, maybe someone who has done it would care to comment

 

T

td4van

Well-Known Member

• Jun 29, 2013

• #3

Yes that is the modified fuel pressure sensor harness

 

andy20166

New Member

• Jun 29, 2013

• #4

OK thanks. There's a foam ring just hanging from the cable, any idea what this is for?

 

T

td4van

Well-Known Member

• Jun 29, 2013

• #5

Is it in the photos above?

If not any chance of a pic?

 

andy20166

New Member

• Jun 30, 2013

• #6

Pictured attached, wasn't sure if it was simply to hold the cable away from the pipes below or should be somewhere else?

Thanks

 

Attachments

• 
  IMG_20130630_120610_090.jpg

  851.1 KB · Views: 218

T

td4van

Well-Known Member

• Jul 2, 2013

• #7

That's not a standard item on that harness - it's not on either of my Td4s with the replacement harness fitted

 

andy20166

New Member

• Jul 2, 2013

• #8

OK thanks. Will leave it where it is not doing any harm. I just wondered what it was meant to do.
Regards

 

G

Gibbo_GTI

Member

• Jul 2, 2013

• #9

andy20166 said:

Pictured attached, wasn't sure if it was simply to hold the cable away from the pipes below or should be somewhere else?

Thanks

Click to expand...

That foam ring is on my replacement harness, it is around the connector on mine which is plugged into the Synergy harness.