M

merlyn82

New Member
i have a 1997 p38 diesel auto dhse , I have just changed the BECM , engine ecu, dashboard, door lock and ignition key etc, engine now now starts air suspension works , but I have consul lights or radio some switches work but windows don’t as the hevac unit , the revise lights stay on when in P slip into neutral go out any help please
 
I've seen issues like this on my tester (which is set up for testing auto vehicles) when I've put a BECM on from a manual vehicle.

My guess is that the BECM you've fitted is set to Manual transmission.

What was the reason it was swapped in the first place?
 
martyuk said:
I've seen issues like this on my tester (which is set up for testing auto vehicles) when I've put a BECM on from a manual vehicle.

My guess is that the BECM you've fitted is set to Manual transmission.

What was the reason it was swapped in the first place?
Click to expand...
+1^^^^
 
You must log in or register to reply here.

Similar threads

rugbynut129
NO ABS/TC/HD lights on dash
Replies
5
Views
722
sierrafery
sierrafery
D
Side lights and starter post new radio instllation
Replies
7
Views
845
dag019
dag019
dogsbody
P38 no crank
Replies
13
Views
1K
Grrrrrr
Grrrrrr
N
Disco 3 - Multiple Faults on Dash, Won't start
Replies
3
Views
2K
Nodge68
Nodge68
MikeFl4
P38A ABS faults and codes
Replies
17
Views
3K
MikeFl4
MikeFl4