G

george man

Active Member
Hi guys
my windscreen wipers stop about 6 inches from where i'd expect them to stop. it's really irritating because i've constantly got them in my view when i'm driving.

i know someone on here said something about a park switch??
what's that, how do i find it and what do i do with it??

also, they dont do a fast wipe, they do intermittant and normal speed but when i put them to fast they just stop where they are. with the recent shocking weather this is somewhat annoying. any ideas?

cheers

George
 
what type of vehicle do you have? what year is it? A few basics would help.

If you have a defender or series then the park switch is found on the wiper motor and is easily changed. They cost about £10 and are the most likely cause of your problems.

If you have a disco, freelander or rangerover then you need to change th whole motor as the park switch isn't available seperately.
 
george man said:
oh yer sorry, it's a 1993 200tdi defender.
does it just come out like a fuse?
cheers
Click to expand...

not exactly. Check out the piccy below. There is a clip that locates it in place. It's worth either making a note of where each wire goes or take a photo that you can use when re-attaching the wires.

wiper_Motor_Parkswitch.jpg
 
bloat1992 said:
they never park on any defender cept the new uns
Click to expand...

I'm on my 3rd defender and ALL mine have parked ok. My first landy needed a new park switch and I've just bought one for my current one as I have recently lost intermittent.
 
bloat1992 said:
we have seven , none of them park cept for on the newish td5
Click to expand...

whats wrong with fitting a new park switch to em? In some cases you can even get away with cleaning up the contacts on the old un.
 
theres nothing wrong with it at all . having read this thread im going to try and sort them out on my defender .
 
cheers, i'll give the contacts a good clean tomoro, by the look of it( covered in mud, clay and dust) it will need a good clean... do i just pull it out?
cheers
 
hi guys, how o i actually get the park switch off the wiper moror? is it just pushed in? i dont wanna pull it if it's going to snal pr anything! have i missed a screw somewhere?

cheers
 
george man said:
hi guys, how o i actually get the park switch off the wiper moror? is it just pushed in? i dont wanna pull it if it's going to snal pr anything! have i missed a screw somewhere?

cheers
Click to expand...

look at the piccy I posted. You will see a clip on the side. It just slides into place.
 
You must log in or register to reply here.

Similar threads

O
Wipers not returning properly
Replies
3
Views
720
Obi_110
O
Trumar
Have I blown the switches
Replies
12
Views
1K
Trumar
Trumar
J
Wipers turn on with the high beams!
Replies
4
Views
1K
JohnHZ3
J
landy-lee
Help 🤯
Replies
11
Views
884
Anaconda
A
Blob
Disco 4 (LR4) Tail Light Theft - this might slow them down but only a little.
Replies
1
Views
558
biketeacherdave
biketeacherdave