discomark10
Well-Known Member
As per usual.. top work!
Hi There,
...........
I am most interested in the spray gun you are using to paint your extras. (hvlp)
I see it in one of your pics.
i would rather have the girls peter,but the parts would be ok also.![]()
Now not my up to girls,![]()
![]()
See the problem, my front brake calipers are one inlet tube.
New calipers are two entrances Discovery 200Tdi, Range Rover Classic, Defender.
Catalog numbers are correct № RTC6777G и RTC6776G
Mark, how fix the problem:
http://www.landyzone.co.uk/lz/f8/discovery-300-front-brake-caliper-query-231879.html
peter,mark has written on that thread just to use one inlet and blank the other hole of with a blanking plug.are your brake discs solid or vented??.have you changed then to vented if yes??
Brake discs solid front/rear.
I wanted to make a change.![]()
ok,they have sent you dual brake system calipers,so either make a t piece up to use both inlets into the one brake pipe,or block one inlet off.
A T piece is the only way to fix it as they are two separate sides.
A T piece is the only way to fix it as they are two separate sides.