Henry_b
Think outside, no box required.
with 3mm plate plasma cutters and welding it will live again lol
Looks like there is very little to weld to!!
Anyway, good luck!!
with 3mm plate plasma cutters and welding it will live again lol
the sills will be fully welded to the body and to the outriggersYou may need some mounts to pop the body on to .....
the sills will be fully welded to the body and to the outriggers
the cage is going to be built by JFT fabrications and no I'm going to skip the hassle with the mounts and just directly weld it to the outriggersWill you not be using proper isolation body mounts as per Discovery 1&2?
You bending pipe yourself or getting a custom cage built up for it?
yeah it would be tragic to find out cluck resulting in a bent arm. but yeah they clear fineJust a thought..
Have you removed the springs/shocks to see if the axle arms touch these roll cage brackets?
Only asking as look close![]()
structural gaffer tape though lol once you get under the cab the chassis is on really good shape it literally drops from 3mm thick to 1mm in one footMark88
Good on you mate
I love your Optimism and welding abilities
Looking forward to seeing the finished article
.....Although "reinforcing a sand castle with Gaffa tape" did spring to mind looking at some of those pics![]()