Co-Pang-Yang
Well-Known Member
Best lights for a D1 imo, deffo brighter than standard 300tdi lights.
Co-Pang-Yang
Well-Known Member
So we made it to Thetford!
Just a small group of five Landies for the trip
XY switch chucked the Black D2’s gearbox into limp mode on the second run so that was parked up in a village and he jumped into the other D2
Lovely 110 that did require a lift home on a recovery truck after the turbo gave up the ghost on the A11 heading home.
Some of the lanes were quite damp
Which I enjoyed
One lane pretty flooded
So all in all a pretty awesome day for the van.
After 200+ miles of half lanes and half duel carriageway didn’t get a single issue or problem.
No over heating, wheels didn’t fall off, nothing!!
Yet to see the GoPro footage but hopefully it came out well.
All in all very happy
Just a small group of five Landies for the trip
XY switch chucked the Black D2’s gearbox into limp mode on the second run so that was parked up in a village and he jumped into the other D2
Lovely 110 that did require a lift home on a recovery truck after the turbo gave up the ghost on the A11 heading home.
Some of the lanes were quite damp
Which I enjoyed
One lane pretty flooded
So all in all a pretty awesome day for the van.
After 200+ miles of half lanes and half duel carriageway didn’t get a single issue or problem.
No over heating, wheels didn’t fall off, nothing!!
Yet to see the GoPro footage but hopefully it came out well.
All in all very happy
Co-Pang-Yang
Well-Known Member
Also whilst in Norfolk went to visit a good friend of mine and may have made an addition to the fleet............
blueovalcraig
Active Member
Looks like you had a great time. That's a nice TD5 with the bull bar and wide wheels too.
Co-Pang-Yang
Well-Known Member
It’s actually a 300tdi auto chassis and running gear with a Discovery 2 body bolted on top.
The same one that was used to tow my broken Grand Cherokee back to the dealer last year.
The same one that was used to tow my broken Grand Cherokee back to the dealer last year.
Co-Pang-Yang
Well-Known Member
Productive Saturday afternoon at my mates workshop.
Wasn’t going to be defeated by these chassis bolts so decided on a new tack.
FIRE!!!!!
And one of the angriest air tools, the mighty chisel
Five minutes of heating and the bolt was eased towards the fuel tank exposing a gap between the rusted nut and the chassis
Then time for the death wheel
Bye bye nut
Then all that was left was to get the air chisel on the inside of the bolt and force it back towards the outside far enough to get a set of mile grips onto it and wiggle what was left of the bolt out.
Then could start lining up the tank guard
And bolted into place!
We did have to lose the centre bumper bracket temporarily as the bolts were not long enough to go through the tank guard and bracket.
However for now the bumper is bolted on when the original side bolts which is enough till I buy some longer bolts (which I would have already done if I had remembered to measure the original ones )
All of this now means I have a pair of proper rear recovery points. Which means can go to the local off road site at the end of the month
This method of getting the bolts out is highly recommended. Wasn’t more than 10 minutes a side to do.
Chris
Wasn’t going to be defeated by these chassis bolts so decided on a new tack.
FIRE!!!!!
And one of the angriest air tools, the mighty chisel
Five minutes of heating and the bolt was eased towards the fuel tank exposing a gap between the rusted nut and the chassis
Then time for the death wheel
Bye bye nut
Then all that was left was to get the air chisel on the inside of the bolt and force it back towards the outside far enough to get a set of mile grips onto it and wiggle what was left of the bolt out.
Then could start lining up the tank guard
And bolted into place!
We did have to lose the centre bumper bracket temporarily as the bolts were not long enough to go through the tank guard and bracket.
However for now the bumper is bolted on when the original side bolts which is enough till I buy some longer bolts (which I would have already done if I had remembered to measure the original ones
)All of this now means I have a pair of proper rear recovery points. Which means can go to the local off road site at the end of the month
This method of getting the bolts out is highly recommended. Wasn’t more than 10 minutes a side to do.
Chris
Co-Pang-Yang
Well-Known Member
Also I’ve decided to punish myself more by buying a second Discovery. Can see the build thread here:
https://www.landyzone.co.uk/land-rover/my-discovery-3-tdv6-hse.326307/
https://www.landyzone.co.uk/land-rover/my-discovery-3-tdv6-hse.326307/
Co-Pang-Yang
Well-Known Member
So been thinking about this a lot lately and I think I’m going to be selling my commercial Disco 1.
Still like the car but really want to get myself a track car as a lot of my friends do this.
Plus having the D3 the van just doesn’t get used really.
Will add more when I get a proper for sale add up.
Still like the car but really want to get myself a track car as a lot of my friends do this.
Plus having the D3 the van just doesn’t get used really.
Will add more when I get a proper for sale add up.
Nooooooooo!
But having said that, I can't say I blame you, the D3 is a smashing motor and I can see the appeal of a track car, Lakeside arena round the corner from you I suppose too.
Shame I have so much invested in my own D1 or that will make a smashing green lane motor for some luck man.
Co-Pang-Yang
Well-Known Member
Haven the completely made my mind up, been handy having this week.
Missus had D3 and I went cross country to work in the van in 8 inches of snow.
But I’m not that bothered about pay and play much anymore and getting a snorkel fitted to the D3 this year along with AT tyres for the 19’s so gonna be fine for green laning.
Missus had D3 and I went cross country to work in the van in 8 inches of snow.
But I’m not that bothered about pay and play much anymore and getting a snorkel fitted to the D3 this year along with AT tyres for the 19’s so gonna be fine for green laning.
Hi buddy I'm considering doing the same body swap as you've done. I know the front body mounts line up
did you make spacers for the rear mounts, what other issues did you have to over come to do the conversion.
Cheers Kev
Co-Pang-Yang
Well-Known Member
That wasn’t me who did that conversion. Was a friend who came laning with us.
Co-Pang-Yang
Well-Known Member
Van got me to work fine yesterday
Shame the snow will probably be gone before I’m back home now.
Missus took the more comfortable snow transport
Shame the snow will probably be gone before I’m back home now.
Missus took the more comfortable snow transport
Co-Pang-Yang
Well-Known Member
Took the van out Thursday night on the hunt for stranded motorists.
Didn’t have to go far, the staff car park at work actually.
Flat battery, wouldn’t start off jump leads so towed it to the warehouse, disconnected the battery for a minute then it fired right up.
Then went out with a few mates in the more rural Essex areas to see what we can find
Managed to rescue a stuck bmw and get a guy home so that was good.
Night ended by getting home around 2am with a semi stripped drive belt so no snow fun last night annoyingly
Didn’t have to go far, the staff car park at work actually.
Flat battery, wouldn’t start off jump leads so towed it to the warehouse, disconnected the battery for a minute then it fired right up.
Then went out with a few mates in the more rural Essex areas to see what we can find
Managed to rescue a stuck bmw and get a guy home so that was good.
Night ended by getting home around 2am with a semi stripped drive belt so no snow fun last night annoyingly
Co-Pang-Yang
Well-Known Member
And then the fun ended. Friday night after work driving out the airfield and on pops battery light and no power steering.
Limp it back to the yard and get a lift home.
Then today after fixing the D3’s brakes we went to get the van from the yard.
Yer, tensioner was a bit past it
Well your not ment to be there
On with a new belt and no more battery light
And then it was back to my mates workshop with a different Land Rover.
Because I had also busted my donut!
Unbolted to confirm it was definitely shot
Bit bashed but otherwise ok
No pulled so had to get medival on the bearing
Mate going to town with the air tools
And half an hour later
And new one in
All back on and goodbye knocking noise
And just quickly tried fixing lack of heat with a new thermostat
Unfortunately still haven’t solved it. Put heaters on and get warm air for 10-20 seconds then just goes stone cold.
Same if stationary or when driving so not sure what’s wrong there.
Limp it back to the yard and get a lift home.
Then today after fixing the D3’s brakes we went to get the van from the yard.
Yer, tensioner was a bit past it
Well your not ment to be there
On with a new belt and no more battery light
And then it was back to my mates workshop with a different Land Rover.
Because I had also busted my donut!
Unbolted to confirm it was definitely shot
Bit bashed but otherwise ok
No pulled so had to get medival on the bearing
Mate going to town with the air tools
And half an hour later
And new one in
All back on and goodbye knocking noise
And just quickly tried fixing lack of heat with a new thermostat
Unfortunately still haven’t solved it. Put heaters on and get warm air for 10-20 seconds then just goes stone cold.
Same if stationary or when driving so not sure what’s wrong there.
