Denty

Denty

New Member
Hi peeps,

Bought a disco 1 little while back and have noticed that it is lop sided ! It has a 2 inch lift kit and after measuring each arch front and back and on both sides I have noticed that the drivers side is 2 inches lower.
I am new to all this business, so would appreciate it if some one could guide me as to what and where to look to try and identify the probs !!

Cheers.
 
All the body mounts still solid on that side? If the sill has seperated from the mounts then it could drop and look lop sided.
 
Denty said:
after measuring each arch front and back and on both sides I have noticed that the drivers side is 2 inches lower.
Click to expand...

Forget measuring floor to arch. Get undernerath and measure the length of each spring. That way, you can rule out (or not) other problems.

Make sure you do it on flat ground. :cool:
 
Hi I have measured all 4 springs and the 2 drivers side are 30 mm more compressed ? Suggestions please 👍
 
Try swapping left to right .. worked on mine!
 
Oioi. Don't drop the soap when Danny's about 😳.

Cheers dudes. I'll have a fiddle ( calm it Danny) and ill let u know how I get on. !
 
You must log in or register to reply here.

Similar threads

MAF Diver
Disco 2 Do you need extended shocks for a 0.8 inch lift at the front? Air suspension in the back (SLS)
Replies
13
Views
808
MAF Diver
MAF Diver
L
another wheel et thread
Replies
0
Views
346
lockitup
L
D
Discovery 5 Tailgate issues
Replies
6
Views
715
Graculus
Graculus
A
Disco TD5 - SLS and Offroad lights on - No Fault
Replies
9
Views
873
AMDS42
A
Cartercustom
Lift blocks on air
Replies
3
Views
705
Royston 90
R