turbominij
Active Member
iv not been off road yet to use the insas waiting for the next green lane or p&p day think im gonna try and get my self some spare shalfts for now my next thing i want is a locker for the back but thats pricy lol
yer im on the mini forum dont go on there much tbh i use the turbominiforum more
yer im on the mini forum dont go on there much tbh i use the turbominiforum more
chrisyleigh
Active Member
Always wanted a mini! My dad had one on bodies ect
So always wanted one
Got a realllly old mini manual from back when my dad had his in 80's/90's
I know where your coming from tho with the power jump
From my disco 110bhp ish I think they are and about 2tons
To my bike thats 120ish bhp and 161kg
So always wanted one
Got a realllly old mini manual from back when my dad had his in 80's/90's
I know where your coming from tho with the power jump
From my disco 110bhp ish I think they are and about 2tons
To my bike thats 120ish bhp and 161kg
turbominij
Active Member
r6 right? i had a GSXR 750 a couple of years ago there absolutly mental bikes good fun lo
chrisyleigh
Active Member
Its in my sig pal
Kawasaki 636 b1h
And yer jumping off the bike and then going in the disco is such a downer lol
Kawasaki 636 b1h
And yer jumping off the bike and then going in the disco is such a downer lol
britishwardog
Active Member
Very nice Disco there!
turbominij
Active Member
Cool problem with a black nil with minimal signage easy to get mixed up lol
Thanks mate
Thanks mate
turbominij
Active Member
Currently working on my 1.4 transfer box down to rebuild it as I really really hate the 1.2 I have on as a temp measure just far to steep and also prity clunky
It's all stripped and ready for a good clean.
Ordered a hd pin and rebuild kit so so once it's clean it can all go back together. Fortunately it looks like everything in side is in good nick and it already has a cross drilled input gear!! Result
It's all stripped and ready for a good clean.
Ordered a hd pin and rebuild kit so so once it's clean it can all go back together. Fortunately it looks like everything in side is in good nick and it already has a cross drilled input gear!! Result
Mr Noisy
Coming in your ears.
neat tip i discovered was put the hi/lo selector ring on the opposite way to original, ie the more worn section engaging with the less worn low range gear and vice versa
attempt to get rid of some of the play in any box as the selector ring will hardly have ever been used in the low range position
attempt to get rid of some of the play in any box as the selector ring will hardly have ever been used in the low range position
turbominij
Active Member
id already though of that was going to post up and see if it was ok to do but think il just do it now might as well spread the wear out hay.
i had a bit of a mare getting one of the bearing races off the diff it wouldn't budge. ended up putting my puller on then heating it up and tapping it with hammer and chisel (ok ok HITTING) and it still took me an hour to get it to come off
managed to forgett to order the darn shims for the rebuild but Mr Noisey to the recue had some for sale
thanks for that mate
was going to post up and see if it was ok to do but think il just do it now might as well spread the wear out hay. i had a bit of a mare getting one of the bearing races off the diff it wouldn't budge. ended up putting my puller on then heating it up and tapping it with hammer and chisel (ok ok HITTING) and it still took me an hour to get it to come off
managed to forgett to order the darn shims for the rebuild but Mr Noisey to the recue had some for sale
thanks for that mate
turbominij
Active Member
Well my bits for the transfer box have arrived
Including a shiny hd cross pin
And I have my parts wash setup and running
so tomorrow il be cleaning everything and starting to re assemble
Including a shiny hd cross pin
And I have my parts wash setup and running
so tomorrow il be cleaning everything and starting to re assemble
turbominij
Active Member
bit of an update work on the transfer box has been slow
i have lots done but as like always other things keep coming up
current state of play is input gear is shimmed fitted and "snug" (which is the technical term im using for enough drag)
the center diff is build up with the new hdpin
the centter diff is a little tiny bit notchy but as the washers are fiber i think it will give once its used and submersed in oil. i recon it needed two or a 29 and a 30 but i had to use a 31 as what ever i needed i cant get
the main shalft is build and shimmed and is "Snug" in the casing.
the selectors are build and ready to fit.
all i really have to do it the intermediat shalft and bolt the casings on
but as i said other things have got in the way...
one of wich my drivers seat deciding it wanted to split from the base so driving round right hand bends my seat tryed to put me in the passenger side not ideal i must say.
i have had to fabricate and weld repair sections for the base and then found the floor had fist sized hols in it what i thougt was floor pan was actuly a MUD PLUG lol
so after a bit of cutting/removing rust i have this
the top right is the second hole i have already repaired which also had the body mount and seat holes bit of a fiddle but perfect fit.
this is after a grind down and a coat of hammerite looks like new
i have lots done but as like always other things keep coming up
current state of play is input gear is shimmed fitted and "snug" (which is the technical term im using for enough drag)
the center diff is build up with the new hdpin
the centter diff is a little tiny bit notchy but as the washers are fiber i think it will give once its used and submersed in oil. i recon it needed two or a 29 and a 30 but i had to use a 31 as what ever i needed i cant get
the main shalft is build and shimmed and is "Snug" in the casing.
the selectors are build and ready to fit.
all i really have to do it the intermediat shalft and bolt the casings on
but as i said other things have got in the way...
one of wich my drivers seat deciding it wanted to split from the base so driving round right hand bends my seat tryed to put me in the passenger side not ideal i must say.
i have had to fabricate and weld repair sections for the base and then found the floor had fist sized hols in it what i thougt was floor pan was actuly a MUD PLUG lol
so after a bit of cutting/removing rust i have this
the top right is the second hole i have already repaired which also had the body mount and seat holes bit of a fiddle but perfect fit.
this is after a grind down and a coat of hammerite looks like new
