E

emanname

Member

• Feb 22, 2015

• #1

Hi guys.. Just abit confused with my defender.. I noticed that the front is sitting a bit lower than rear.. You can see from the photo the rear arch space from wheel is bigger than front but still the body is level to that big difference.. I took a measure from the rear of the side rock slider then from the front of the rock slider the hight from the ground is front about 2cm lower than rear.. I think that 2cm is the engine weight, bull bar etc.. Do you think this is normal or the front springs are tired?

Thanks...

 

Attachments

• 
  68322_10151096910636791_1946860318_n.jpg

  63.4 KB · Views: 295

cornish rattler

Well-Known Member

• Feb 23, 2015

• #2

Front suspension worn out or different spec springs front and rear

 

trax

.

Events Planner

• Feb 23, 2015

• #3

usually so you can carry a load in the back and not have it hitting the bumps

 

Grimmer

THE Winner

• Feb 23, 2015

• #4

trax said:

usually so you can carry a load in the back and not have it hitting the bumps

Click to expand...

^^^^ this sounds about right ^^^^

 

MayorQuimby

Active Member

• Feb 23, 2015

• #5

It does look a little uneven. Like the front and rear springs are mismatched. Funnily enough though i kinda like it with a little rake. I prefer them a little high in the tail