kevstar

Well-Known Member
Full Member
Who can help ???

Noise is sounding like its the osf but it could be the speaker effect.
Wheel bearings & uj's are good.
Very noticeable from 5mph-35mph after this it goes away??
Got a good bit of back lash when turning front the prop back & forth (how much is acceptable)
Dip the clutch & the noise goes away.

Opinions please ;)
 
Sounds like my old disco td5 lift the wheels up to check for play and nothing couldn’t get it to sound better or worse when cornering and also quietened down at speed but was extremely noisy when driving at and below town speed. It was a wheel bearing on the front.
It was strange as it just appeared one morning. The night before everything was quiet then it was suddenly there. You could only tell the bearing had gone when it was off and spun off the vehicle.
 
Sounds like my old disco td5 lift the wheels up to check for play and nothing couldn’t get it to sound better or worse when cornering and also quietened down at speed but was extremely noisy when driving at and below town speed. It was a wheel bearing on the front.
It was strange as it just appeared one morning. The night before everything was quiet then it was suddenly there. You could only tell the bearing had gone when it was off and spun off the vehicle.

Already checked the wheel bearings no play at all & no vibration when holding the spring ;)
 
unfortunately replacement if often the only way of been sure whether its that or not,lifes easier if you can see or feel any wear

If its only a bearing happy days, definitely no play in it.
I just checked the service history it had an osf bearing in 2016 & covered 16K since bearing cost £427.00 :eek:
wonder if it was a genuine LR item or the garage buying in a cheapo & costing out oem.
 
If its only a bearing happy days, definitely no play in it.
I just checked the service history it had an osf bearing in 2016 & covered 16K since bearing cost £427.00 :eek:
wonder if it was a genuine LR item or the garage buying in a cheapo & costing out oem.
when i get stuff were its not clear like you, i try running through the gears applying power etc with all 4 wheels off the ground, one such event showed up a distorted tyre noticeable as the gap between it and the ground varied
 
when i get stuff were its not clear like you, i try running through the gears applying power etc with all 4 wheels off the ground, one such event showed up a distorted tyre noticeable as the gap between it and the ground varied

I will get a better look at it over the weekend when the weather breaks & I have some time to myself
prob is I get a lot of visitors & end up getting nothing done.
 

Similar threads