Discophil34

Discophil34

New Member
Evnin. Have my MOT booked for tomorrow, but as always with landy's u fix one thing, then another fault appears. My speedo became intermitant today , now not rising at all. All other gauges fine. Also rear wiper and washer dont work. So is any of these an MOT failure? Oh and the reverse light switch is worn sa need to hold lever in reverse for light to stay on. :-(
 
Rear wiper and washer and reverse lights won't fail a mot to my knowledge. The speedo I should imagine is a fail but you never know if they will see it!! I had a Megane years ago with a speedo fault and they never saw it.
 
Let us know how you get on and good luck, I have the same problem with the reverse lights on my disco td5.
 
They shouldnt go fast enough to register a speed so if they dont c it then they wont fail it
 
rightly or wrongly. i`ve been under the impression that you need a speedo to pass the mot. but that its never checked to see that it actually does work.
thats my experience of 30 odd years of mot`s on bikes and cars.
 
I haven't a clue what the tester gets up to, and really not interested.
It goes in, tested and comes out with a pass. :D

As for a speedometer working, it only has to be looked at when the vehicle is driven into the garage test area, if the needle hasn't moved at walking pace then something is wrong.
 
Good luck, as I have just gone through the worry at the beginning of the week ;)

Oh, if you want a new reverse switch, let me know, as I bought one thinking my Diff lock switch was duff, but it ended up being a snapped connection wire at the spade connector - so give me a shout.
 
Will do :) its in at 12 so will c and post back on here. Its amazing how u start to panic with a landy at MOT time. Last week , had it all under control :-S
 
Well FAILED and dont even get me started on the council MOT station. It needs welded just before the o/s rear body mount,at the junction between the rear arch and inner and outer sill. Where:(:( to start? Oh and the front wheel bearing has too much play.
 
Discophil34 said:
Well FAILED and dont even get me started on the council MOT station. It needs welded just before the o/s rear body mount,at the junction between the rear arch and inner and outer sill. Where:(:( to start? Oh and the front wheel bearing has too much play.
Click to expand...
Mine failed on the front bearing so i replaced it,still had play.Turned out to be the swivel pin bearing.I removed 4-5 shims tightened it back up,job done.
Dont sweat to much dude most things are easily done with a haynes and some swearing!.
Good luck.
;)
 
Cheers fellas, yeh ill try tightening the hub first as ive got a proper boy spanner now as aposed to a hammer and chisel I used last time :D if not then ill try a shim. As for the welding, im not sure weather to just plate over the hole or buy the body mount bracket and weld it on as the hole is just wherf the mount braket meets the sill. But imagine it would be a pain in the hoop to remove the body mount bolt.
 
You must log in or register to reply here.

Similar threads

malcolm_durant
Freelander 1 Storytime: how not to pass your MoT (twice)
Replies
14
Views
2K
ER1C
ER1C
MaxSpec
Tinworm & Teenage Bodges
Replies
6
Views
1K
MaxSpec
MaxSpec
BillyboysLad
L322 First day with Sally
Replies
8
Views
1K
RangeRoller dt
RangeRoller dt
Nodge68
Freelander 2 (LR2) LR trouble codes.
Replies
6
Views
33K
Keith Kernow Kernewick
Keith Kernow Kernewick
LOCKESBOY
My 54 Plate 4.4 vogue for 850 quid :) :(
Replies
8
Views
1K
weemac
weemac