RustyDefender

Well-Known Member
Hey attached a image for context, will this pass MOT? I do have arches however it does stick out still by about a inch?

If not can anyone suggest any bigger arches :homer:
 

Attachments

  • WhatsApp Image 2023-09-26 at 11.23.02.jpeg
    WhatsApp Image 2023-09-26 at 11.23.02.jpeg
    503.7 KB · Views: 443
Get a set of “MoT” wheels?
Actually, I take that comment back.
A rejected insurance claim would be dreadful…
 
Last edited:
What country are you in? I assume UK as you mention MoT?

Tyres sticking out of the arches is an offence and breaks Construction & Use Regulations. It has nothing todo with the MoT test. You could be pulled or ticketed at any point. Could also potentially have an impact on your insurance for a non roadworthy vehicle should you be in an accident.

Basically... don't be that person.

Run a more sensible sized tyre or wider wheel arch flares.
 
Yeah I want to do this build properly not just get it through a MOT, are there any arches that anyone could recommend me getting?
 
No. But I can suggest narrower tyres.

Stops you looking like a numpty as well! :D

I just got these today.. I don't do much road driving that's why I went for these

@Propman I've got something similar to those on now.. i wouldn't recommend them
 

Attachments

  • WhatsApp Image 2023-09-26 at 11.23.04.jpeg
    WhatsApp Image 2023-09-26 at 11.23.04.jpeg
    743.6 KB · Views: 237
I just got these today.. I don't do much road driving that's why I went for these

@Propman I've got something similar to those on now.. i wouldn't recommend them
you look like you are running standard arches currenrtly the ones @Propman suggested should be 30mm wider and cover the tyre.

It depends what look you are going for, devon 4x4 have some options (link) but when I was a young and foolish student with no money I just used some stable matting to make rear arches for my oversized wheels, whereas they were technically legal they didn't do a lot in terms of a wheel arch but a whole sheet of stable matting is only about 20£:

1695737734431.png
 
It was the light weight foam wall matting I used (link) not the heavy rubber floor mats (that is on the floor of the tub). Looks like is is currently £17 a sheet so it was probably cheaper when I used it!
Thanks for this!

I'm kinda wanting it to look good and found a few that can just bolt on with the correct width now! Just they're so over priced
 
Over here in NA the latest fad is to add wheel spacers so that the tires stick half way outside the fenders. Mostly seen on pickup trucks and Jeeps. Personally I think it looks stupid.
 
Over here in NA the latest fad is to add wheel spacers so that the tires stick half way outside the fenders. Mostly seen on pickup trucks and Jeeps. Personally I think it looks stupid.
Sorry to hear that. Over here it seems to be on the wane. It isn't legal in the UK either.
 
Sorry to hear that. Over here it seems to be on the wane. It isn't legal in the UK either.
Eating ice creams and snogging is necessarily legal in the eyes of non present wives either in this country.....😂😂😂😂😂
Mind you having a wider track seems to be your fancy in the back end department....😀😀😀
 
Eating ice creams and snogging is necessarily legal in the eyes of non present wives either in this country.....😂😂😂😂😂
Mind you having a wider track seems to be your fancy in the back end department....😀😀😀

Had enough of your so called advice or ask for advice. You obviously have no other reason to be here except attempt to antagonise members.
It has been brought to the attention of the Moderators.

J
 
Thats 3 posts I've seen now of you talking about this mans wife and marriage.

You're a fùcking dìckhead.
Not particularly bothering me, to be honest.
After 13 and a bit years on LZ, you get used to insults and slanders.
And it isn't like I haven't made a few myself! :vb-lol:
 

Similar threads