J

jdhog

New Member

• Jan 29, 2014

• #1

I have just had my 110 CSW 300TDI fail its MOT on quite a bit of chassis corrosion. I am fortunate to work for a machine tool company that has a Sheet Metal dept, so i want to get some repair parts made. To help this it would be useful to get hold of a chassis drawing (blueprint). Does anyone know where I can get hold of some drawings
Thanks in advance for anyone's time to reply.
JDH

 

T

Thor1950

Well-Known Member

• Jan 29, 2014

• #2

Why can you not draw your own working drawings of what you need? That is what we did in the old days

 

Marmaduke

Well-Known Member

• Jan 29, 2014

• #3

Old skool for me when I did mine, cut the rot away with a grinder and air saw then make templates from cereal boxes then cut that out of 2mm steel and trim for a perfect fit

 

landowner

Pensioner Pete

Full Member

• Jan 29, 2014

• #4

I cut a piece of steel about the right size then draw round it on chassis and then cut, I'm useless at measuring

 

D

discomania

Well-Known Member

• Jan 29, 2014

• #5

Full LR chassis cad drawings are available on the net - my friend who has a CNC plasma machine used to just put 3mm sheet into his machine, select a bit of chassis he wanted to cut as a repair section and hit go!

Not sure how he found them, he doesn't live in the UK any more so I can't just pop over and get a copy.

 

Landyfox

Well-Known Member

• Jan 29, 2014

• #6

marmaduke said:

old skool for me when i did mine, cut the rot away with a grinder and air saw then make templates from cereal boxes then cut that out of 2mm steel and trim for a perfect fit

Click to expand...

+1^

 

J

jdhog

New Member

• Jan 31, 2014

• #7

Thanks all for replying. It was just a stab in the dark in case I could have got hold of a chassis drawing. As it turns out I just got under the Landy last night with a Rule and some Callipers and just sketched what I needed. Old fashioned way is the best as Thor1950 said
Cheers again for your time folks
JDHog

 

T

Thor1950

Well-Known Member

• Jan 31, 2014

• #8

jdhog said:

Thanks all for replying. It was just a stab in the dark in case I could have got hold of a chassis drawing. As it turns out I just got under the Landy last night with a Rule and some Callipers and just sketched what I needed. Old fashioned way is the best as Thor1950 said
Cheers again for your time folks
JDHog

Click to expand...

glad to help anytime I can. Good luck with the project. Oh and we need to see pics before, during , and after..

And welcome to LZ:tea: