Ironstrike

Ironstrike

Well-Known Member
Hi all,

I wonder could anybody explain exactly what this means on a MOT failure (Land Rover 90):
Suspension component pin or bush excessively worn offside/nearside upper.

I'm not sure exactly what I should be replacing here.

Thanks

Pete
 
By using the term "upper' it sounds like they are referring to the bush at the top of the shock absorber. I would ask them to clarify unless that bush is totally and obviously shot! Not easy to see though up the turret!
 
  • Like
Reactions: 8ha
Clunkbucket said:
By using the term "upper' it sounds like they are referring to the bush at the top of the shock absorber. I would ask them to clarify unless that bush is totally and obviously shot! Not easy to see though up the turret!
Click to expand...
Thanks for the reply, I would have initially thought it was something to do with the shocks but he mentioned kingpins so that threw me a bit. I better call and see
 
If it's the top pin on the swivel you may be able to take a few shims out to get it past the MOT.
Then get new items & replace at a later date.
 
Swivel.JPG

He is probably referring to part E
 
That's great, thanks for the diagram. Hopefully I can shim it out for the MOT. I don't fancy taking the whole hub off yet, I need to replace the discs at some stage, I could do both jobs together.

Thanks
 
There are a few of us left who will help for tea & biscuits.
It's good to keep your mind active & ensure sheds keep moving.
 
I called the garage back and and it is the swivel pin he means. So I have ordered the shims and hopefully that will take out the play enough to get it through the retest. Thanks Clunkbucket. I will stock up on Hobnobs just in case I get stuck Phill
 
Hicap phill said:
You don't need the shims. You have to take them out to make it tighter ;)
Remove E( off @Clunkbucket picture) then remove the shims(number 5).
This will take out any of the play for an MOT
Click to expand...
Of course, he said remove the shims, I was thinking motorbike valves, add to remove play ... ah well I have some nice new shims now to decorate my garage :)
 
Ironstrike said:
Of course, he said remove the shims, I was thinking motorbike valves, add to remove play ... ah well I have some nice new shims now to decorate my garage :)
Click to expand...
Did you get a few different thicknesses? If so they may well come in handy straight away. eg if you take one of the old shims out and then bolt the pin back up, the wheel might be too stiff to turn. If you have a new shim that is thinner than the one you took out you could put that one in so that you get the right tightness in the pin. If that makes sense?
 
You must log in or register to reply here.

Similar threads

H
MOT Failed
Replies
3
Views
1K
Datatek
Datatek
M
Repair costs
Replies
9
Views
2K
Stanleysteamer
Stanleysteamer
Hammer'n'tongs
Tyres wearing unevenly:- Axle ends out of alignment
Replies
9
Views
1K
Hammer'n'tongs
Hammer'n'tongs
F
Freelander 1 welding question - Seat belt anchorages
2
Replies
25
Views
2K
yfo866
yfo866
xDParis64
Right...
Replies
9
Views
1K
pwood999
pwood999