what state are the seats in - and could you post some pics of the interior at some point - the more orginal and unfettled with the more it is worth to me
there is method in my madness
PS: dont give up on repairing it yourself just yet - have a good read of MIG Welding - The DIY Guide and you might get inspired to have a go yourself
there is method in my madness
PS: dont give up on repairing it yourself just yet - have a good read of MIG Welding - The DIY Guide and you might get inspired to have a go yourself
vivnap
Banned
ive just spend 1500 quid on a esab 251 mig/mag welder and would be willing to weld the axle casing for a drink. only problem is i wont be able to do it for another few weeks as i am having a digital volt/amp meter fitted to the welder. the shock mount is a definate fail as is the swivel housing, the exhaust should be an advise notice but the bulkhead is not a fail unless the rot is where it mounts to the chassis/foot wells or there are jagged edges on the out side surfaces.
if ppl were to give a rough idea where they live.they would be supprised at the responce they would get with help fixing vehicles,i live nr swansea im able and willing to work on landrovers i specialise in series 3s i also do chassis replacement, welding. i overhall gear boxes and axles and electrics,and i dont charge rip off prices i do it as a hobby i dont have a work shop but i have tools and im mobile but due to size of wifes car i dont carry a lot only what is needed, if you have a garage i will travel to you with in a reasonable distance.
spam !
yu mean summat a bit more helpfull than "on the wet side of south wales,(always raining)"
bustersbus
Well-Known Member
Now there's a good idea!
http://www.landyzone.co.uk/lz/f20/where-do-you-live-52006.html?highlight=live
Ohh! Ah nearly forgot tae say....
SPAAAAMMMMM
Pikey
Dummy Ejection Facilitator..
Or within 30 cm of a safety dependant component like the brake servo? or the clutch master Cylinder.
defenderdavie
New Member
spam
Cheers mate, money sent
