G

Gran

Member
Just picked the Disco up from the garage & he has passed it but has put an advisory to change the link bar from the anti roll bar to the axle. (passenger side)
Now before I go out & but a new one and set to removing the buggered one is there a setting to adhere to or is it just bung it on & tighten it up?

Do you have to tighten it when the road wheels are all down?
Ball park cost?

Any help appreciated, it will make a change to do something on the truck & it not be sub zero.

Keith
 
Bolt it on, have fun getting the old one off though, most likely the ball will spin I the socket so make sure you have a junior hacksaw handy and use WD40 spraying it on every 20 mins for an hour or so before, even better an air gun will generally whip the nut off by pure force and speed.
 
I've had advisories before (sometimes 6+) that I've ignored then they have never been mentioned again!! I'm not suggesting do nothing, just saying. (I'd probably have to wait for it to break before justifying spending actual money on it). Still saving up for two rear hubs!

Dave
 
Take the wheek off and use a grinder. BUT when you get the new one make sure you get the nuts as well, they don't come with new nuts as standard any more. Double hit from the manufacturers, reduce cost (no nuts), extra revunue (sell nuts). Didn't realise this until I took the drop link out of the box to fit !!
 
chrimcne said:
Take the wheek off and use a grinder. BUT when you get the new one make sure you get the nuts as well, they don't come with new nuts as standard any more. Double hit from the manufacturers, reduce cost (no nuts), extra revunue (sell nuts). Didn't realise this until I took the drop link out of the box to fit !!
Click to expand...

I would check your suppliers as all mine come with nuts still, fiot loads of drop links each week and never not had nuts....
 
They are a funny thread pitch as well if I recall but fortunately I have access to an excellent nut and bolt shop!
 
Thanks for all the replies lads, I will ask about the nuts before purchasing.

Regards

Keith
 
Jongould said:
I would check your suppliers as all mine come with nuts still, fiot loads of drop links each week and never not had nuts....
Click to expand...

I agree, all the ones I've done in the past came with nuts. When I rang the supplier he said none of them do any more but he had them "on the shelf". Fat lot of good as I needed them on the link bar and not 15 miles away in a box !
 
You must log in or register to reply here.

Similar threads

B
Disco 4 (LR4) Fuel guage issue
Replies
13
Views
876
Graculus
Graculus
A
Problem adjusting shims on steering
2
Replies
39
Views
2K
Bobsticle
Bobsticle
S
Anti roll bar bracket postions
Replies
4
Views
739
Sam RRC
S
C
Series 3 passenger side fuel tank
Replies
7
Views
1K
steve2286w
steve2286w
B
ABS Issue
Replies
14
Views
915
Bangerang1
B